Problem with Water Transport to a factory

[pizman]

Hi Guys. I´m new. Hope this is right section and you can help.

I use modMap "Volksvalley" and there is a Water-decalcifaction Factory there.
I try to use CP to bring Water load from the Farm (Pump) to bring it to factory and load out there.

First i try Mode1 (Transport- Load on Start Point) . I Can choose "Water" as Type.... But CP not start loading the water on the pump.
THEN
I Use Mode "Liquid Trasport" and CP starts to get the water (without Holding Point there... it stops already if Pump is near the route) BUT Problem.... I can´t make it working that it load out the water on the factory. I Try to set a Hold point there and a LoadOut Point, too. Nothing work.

Look like the problem is the load out technic. I ´can´t use the standard "i" Button there. To load out i have to use the "r" Button for this mod Factory if i drive manual. Is this the issue ??
( I don´t test alreade but maby same problem is with other liquids like milk or fuel at Mod Factorys)

Please tell me if i do an mistake and THIS is still posible with CP.... OR please tell me if this feature is planed next time !

Thank You !

[DynamicXYZ]

Don't quote me on this but if I had to say something I'd say that CP doesn't support the tip trigger or sell point that is on the map.

[lcc1211]

If you've used liquid transport and CP is filling the container, and you've placed a wait point at the tip trigger, then CP is not recognizing the tip point or you are not in the exact spot where the tip point requires. Perhaps reply back with a copy of your log attached and maybe a video of the course as well.

[pizman]

Thanks for reply.
I´m sorry to say i got no experience with logfiles and where it located. additional i never make a video before. So i can´t send you this stuff.
Maby the follow information helps you, too ....

• When CP reach the Factory it stops and NOT loadout the Water. It stay there forever. If i get into vehicle and stop CP Helper (not moving the vehicle) i see it´s already in the upload zone.... So i can now use "R" Button to start overloading myself if i want. ( Position looks good i think)

• I try for testing to use a 100k water Tank from my "Kotte Pack" instead of the Factory Tip point .....
  I make a test Route. Here it workes with Liquid Transport Mode.... CP get the Water on Pump ( No Holding Point there).... drives to the Tank.... Stops on the Holdingpoint i set near the Tank.... And then load out the water in the tank and start new round.... As i see in Videos the automatic Load Out on a Animal Water sport workes too.

So i think problem is the kind of Tip Point, that is used in this Mod-decalcifaction Building.

Maby someone got information if CP will work with those things in a futured version.

Thanks for youre Help guys !

[dkfiremann]

You need to supply a link to the mode you are using.
I think it is your mode that is configured incorrectly.
If it do not use the normal key for unload, then I suspect that the problem not with courseplay.

[Akoasma]

I think, it is this Mod https://www.modhoster.com/mods/slow-sojamilch-produktion
And the mod use the "FabrikScript" http://ls-modcompany.com/forum/filebase/index.php?file/21-fabrikscript-v2-1-71-13-02-2017-additionaltriggers-v1-0-4-13-01-2017/

[pizman]

Hi again.
I just search for the mod but i can´t find it as a single downlaod....
I use the Map Volksvalley ... https://www.modhoster.de/mods/volksvalley
the decalcifaction is a part of it..... I wrote a request for info to the modder of the map already....
Maby dkfiremann you got this map (or download it quickly ) and can check this .
Thanks for youre greate support !!

[pops64]

Try with version 01.00116 or higher has the kotte universal was bugged with water triggers and report back