Call Stack Error in Function handleUnloading

[scaniafreak]

I play on hobbs farm. I have made leverling course for one of the bunkers. The leveling itself goes OK. After a while the tractor goes to the waiting point, even when no truck or tractor is near. When i click now drive, the leveler goes 1 round, and then back to the waiting point.

On the other side i have made a course for the truck to unload in the bunker.
When the leveler is waiting, and the truck approaches, both keep waiting for eachother.
the truck waits for the leveler (which is already waiting), and the leveler waits for the truck,...
See the attached picture.

![fsscreen_2017_05_09_18_55_27

Any idea?

[dkfiremann]

Are you leveller parked outside the bunker?
Make sure that the Leveler tractor is parked inside the walls of the bunker.

[scaniafreak]

The leveler is indeed parked outside of the bunker. That's how it's explained in tutorials

[dkfiremann]

Okay, I haven't looked in the manual.
But for every youtube video that explain how leveling works, and in my tests, the tractor needs to be parked inside the bunker frame.
Now, what is the bunker frame? That is the area in front of the bunker, so that if you extend the walls of the bunker the tractor is still inside.
As I see it, your tractor is on the wrong side of the bunker wall.

Take a look at: https://www.youtube.com/watch?v=40FDWBvFqKo&t=1477s

[pops64]

I haven't look at the code but it doesn't matter where the waitpoint it just as long it doesn't interfere in unloading. My only concern is the second way point is inside of the trigger. According to the PDF the second way point is supposed to be outside of the trigger in line with the first. Try moving the second waypoint outside of the trigger. Also it is not suppose to run continuously if there is nothing to level. So try again without hitting the drive now button has this may be causing the issue.

[Beevster]

Also make sure no other Vehicles in the area are not close by the pits, Even if they are supposedly "turned OFF" they can still interfere with the pit leveller which controls traffic. As i think he can control more then one vehicle to stop Hence stopping your load being tipped or even driving away as i found out.

Also yoru leveller course looks way to complicated, try make it a simple in and out course make sure you start in the Bunker by 1/4 and then park just enough away from traffic incoming, then reverse back and stop before the pit edge markers.. make sure there is 2 arrows pointing towards the pit on the stop part to be sure the leveller repeats the level cycle nicely.

[scaniafreak]

Thanks for the suggestions. I modified the leveler course with coursedrawer, and put the second waypoint outside the bunker. It seems to help, but it got me another problem which is far more strange...

At the moment when the truck starts tipping, the FPS drops to 3 FPS, and stays that way. I waited 1 to 2 hours, but the games stays at 3 fps, and the truck is still tipping. It happens with and without the leveler course active.

Then i re-recorded the leveler and tipping course brandnew, and made the leveler course simpler, just as Beevster suggest. But also then the FPS drops to 3 fps, already when the truck starts to drive backwards towards the bunker.

The PDF you mentioned, were can i find it. Maybe it contains more helpfull information for other drive modes:)

Any suggestions regarding the FPS drop. Any logging i can provide?

[pops64]

Yea the FPS drop is definitely a nil error of some kind. Just post your game log to paste bin or gist and I will see what the error is. https://github.com/Courseplay/courseplay/wiki The PDF is only for mode 10 has not been put into the manual yet.Link to the manual still a WIP for conversion to FS17 mostly correct tho.

[scaniafreak]

Thanks for the quick reply. Here is my log:
https://gist.github.com/scaniafreak/75658907780f1f5ca6a1bf7c7dd67bd0

Just to mention, i just downloaded the latest CP (.138) and the FPs drop occurs also with that version. I also have started only that particular route. No other CP's were running.

[Anonymous-any]

#2066
It's ok :) I just forgot to say I use HKL with wood IT to unload in water meaning the unload process maybe is not appropriate to courseplay with HKL arms I don't know.
Br CP