dashpay · UdjinM6 · Mar 14, 2019 · Mar 7, 2017
@@ -104,7 +104,7 @@
 # because the rpcpassword is transmitted over the network unencrypted.
 
 # server=1 tells Dash-Qt to accept JSON-RPC commands.
-# it is also read by dashd to determine if RPC should be enabled 
+# it is also read by dashd to determine if RPC should be enabled
 #rpcallowip=10.1.1.34/255.255.255.0
 #rpcallowip=1.2.3.4/24
 #rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96
@@ -116,12 +116,7 @@
 # running on another host using this option:
 #rpcconnect=127.0.0.1
 
-# Transaction Fee Changes in 0.12.0
-
-# Send transactions as zero-fee transactions if possible (default: 0)
-#sendfreetransactions=0
-
-# Create transactions that have enough fees (or priority) so they are likely to begin confirmation within n blocks (default: 1).
+# Create transactions that have enough fees so they are likely to begin confirmation within n blocks (default: 6).
 # This setting is over-ridden by the -paytxfee option.
 #txconfirmtarget=n
 

@@ -21,7 +21,7 @@
 REGEX_ARG = re.compile(r'(?:map(?:Multi)?Args(?:\.count\(|\[)|Get(?:Bool)?Arg\()\"(\-[^\"]+?)\"')
 REGEX_DOC = re.compile(r'HelpMessageOpt\(\"(\-[^\"=]+?)(?:=|\")')
 # list unsupported, deprecated and duplicate args as they need no documentation
-SET_DOC_OPTIONAL = set(['-rpcssl', '-benchmark', '-h', '-help', '-socks', '-tor', '-debugnet', '-whitelistalwaysrelay', '-blockminsize'])
+SET_DOC_OPTIONAL = set(['-rpcssl', '-benchmark', '-h', '-help', '-socks', '-tor', '-debugnet', '-whitelistalwaysrelay', '-blockminsize', '-sendfreetransactions'])
 
 def main():
   used = check_output(CMD_GREP_ARGS, shell=True, universal_newlines=True)

@@ -80,7 +80,6 @@ def run_test(self):
 
         # Restart the node with a higher min relay fee so the parent tx is no longer in mempool
         # TODO: redo with eviction
-        # Note had to make sure tx did not have AllowFree priority
         stop_node(self.nodes[0],0)
         self.nodes[0]=start_node(0, self.options.tmpdir, ["-minrelaytxfee=0.0001"])
 

@@ -24,8 +24,8 @@ def __init__(self):
 
     def setup_network(self):
         self.nodes = []
-        self.nodes.append(start_node(0, self.options.tmpdir, ["-blockprioritysize=0"]))
-        self.nodes.append(start_node(1, self.options.tmpdir, ["-blockprioritysize=0", "-acceptnonstdtxn=0"]))
+        self.nodes.append(start_node(0, self.options.tmpdir, []))
+        self.nodes.append(start_node(1, self.options.tmpdir, ["-acceptnonstdtxn=0"]))
         self.is_network_split = False
         self.relayfee = self.nodes[0].getnetworkinfo()["relayfee"]
         connect_nodes(self.nodes[0], 1)
@@ -254,7 +254,7 @@ def test_nonzero_locks(orig_tx, node, relayfee, use_height_lock):
 
         # Now mine some blocks, but make sure tx2 doesn't get mined.
         # Use prioritisetransaction to lower the effective feerate to 0
-        self.nodes[0].prioritisetransaction(tx2.hash, -1e15, int(-self.relayfee*COIN))
+        self.nodes[0].prioritisetransaction(tx2.hash, int(-self.relayfee*COIN))
         cur_time = get_mocktime()
         for i in range(10):
             self.nodes[0].setmocktime(cur_time + 600)
@@ -267,7 +267,7 @@ def test_nonzero_locks(orig_tx, node, relayfee, use_height_lock):
         test_nonzero_locks(tx2, self.nodes[0], self.relayfee, use_height_lock=False)
 
         # Mine tx2, and then try again
-        self.nodes[0].prioritisetransaction(tx2.hash, 1e15, int(self.relayfee*COIN))
+        self.nodes[0].prioritisetransaction(tx2.hash, int(self.relayfee*COIN))
 
         # Advance the time on the node so that we can test timelocks
         self.nodes[0].setmocktime(cur_time+600)

@@ -103,19 +103,19 @@ def run_test(self):
 
         # Check that ancestor modified fees includes fee deltas from
         # prioritisetransaction
-        self.nodes[0].prioritisetransaction(chain[0], 0, 1000)
+        self.nodes[0].prioritisetransaction(chain[0], 1000)
         mempool = self.nodes[0].getrawmempool(True)
         ancestor_fees = 0
         for x in chain:
             ancestor_fees += mempool[x]['fee']
             assert_equal(mempool[x]['ancestorfees'], ancestor_fees * COIN + 1000)
 
         # Undo the prioritisetransaction for later tests
-        self.nodes[0].prioritisetransaction(chain[0], 0, -1000)
+        self.nodes[0].prioritisetransaction(chain[0], -1000)
 
         # Check that descendant modified fees includes fee deltas from
         # prioritisetransaction
-        self.nodes[0].prioritisetransaction(chain[-1], 0, 1000)
+        self.nodes[0].prioritisetransaction(chain[-1], 1000)
         mempool = self.nodes[0].getrawmempool(True)
 
         descendant_fees = 0
@@ -136,7 +136,7 @@ def run_test(self):
         assert_equal(len(self.nodes[0].getrawmempool()), 0)
         # Prioritise a transaction that has been mined, then add it back to the
         # mempool by using invalidateblock.
-        self.nodes[0].prioritisetransaction(chain[-1], 0, 2000)
+        self.nodes[0].prioritisetransaction(chain[-1], 2000)
         self.nodes[0].invalidateblock(self.nodes[0].getbestblockhash())
         # Keep node1's tip synced with node0
         self.nodes[1].invalidateblock(self.nodes[1].getbestblockhash())

@@ -52,10 +52,8 @@ def run_test(self):
             assert(sizes[i] > MAX_BLOCK_SIZE) # Fail => raise utxo_count
 
         # add a fee delta to something in the cheapest bucket and make sure it gets mined
-        # also check that a different entry in the cheapest bucket is NOT mined (lower
-        # the priority to ensure its not mined due to priority)
-        self.nodes[0].prioritisetransaction(txids[0][0], 0, int(3*base_fee*COIN))
-        self.nodes[0].prioritisetransaction(txids[0][1], -1e15, 0)
+        # also check that a different entry in the cheapest bucket is NOT mined
+        self.nodes[0].prioritisetransaction(txids[0][0], int(3*base_fee*COIN))
 
         self.nodes[0].generate(1)
 
@@ -74,7 +72,7 @@ def run_test(self):
 
         # Add a prioritisation before a tx is in the mempool (de-prioritising a
         # high-fee transaction so that it's now low fee).
-        self.nodes[0].prioritisetransaction(high_fee_tx, -1e15, -int(2*base_fee*COIN))
+        self.nodes[0].prioritisetransaction(high_fee_tx, -int(2*base_fee*COIN))
 
         # Add everything back to mempool
         self.nodes[0].invalidateblock(self.nodes[0].getbestblockhash())
@@ -98,52 +96,42 @@ def run_test(self):
             if (x != high_fee_tx):
                 assert(x not in mempool)
 
-        # Create a free, low priority transaction.  Should be rejected.
+        # Create a free transaction.  Should be rejected.
         utxo_list = self.nodes[0].listunspent()
         assert(len(utxo_list) > 0)
         utxo = utxo_list[0]
 
         inputs = []
         outputs = {}
         inputs.append({"txid" : utxo["txid"], "vout" : utxo["vout"]})
-        outputs[self.nodes[0].getnewaddress()] = utxo["amount"] - self.relayfee
+        outputs[self.nodes[0].getnewaddress()] = utxo["amount"]
         raw_tx = self.nodes[0].createrawtransaction(inputs, outputs)
         tx_hex = self.nodes[0].signrawtransaction(raw_tx)["hex"]
-        txid = self.nodes[0].sendrawtransaction(tx_hex)
-
-        # A tx that spends an in-mempool tx has 0 priority, so we can use it to
-        # test the effect of using prioritise transaction for mempool acceptance
-        inputs = []
-        inputs.append({"txid": txid, "vout": 0})
-        outputs = {}
-        outputs[self.nodes[0].getnewaddress()] = utxo["amount"] - self.relayfee
-        raw_tx2 = self.nodes[0].createrawtransaction(inputs, outputs)
-        tx2_hex = self.nodes[0].signrawtransaction(raw_tx2)["hex"]
-        tx2_id = self.nodes[0].decoderawtransaction(tx2_hex)["txid"]
+        tx_id = self.nodes[0].decoderawtransaction(tx_hex)["txid"]
 
         try:
-            self.nodes[0].sendrawtransaction(tx2_hex)
+            self.nodes[0].sendrawtransaction(tx_hex)
         except JSONRPCException as exp:
             assert_equal(exp.error['code'], -26) # insufficient fee
-            assert(tx2_id not in self.nodes[0].getrawmempool())
+            assert(tx_id not in self.nodes[0].getrawmempool())
         else:
             assert(False)
 
         # This is a less than 1000-byte transaction, so just set the fee
         # to be the minimum for a 1000 byte transaction and check that it is
         # accepted.
-        self.nodes[0].prioritisetransaction(tx2_id, 0, int(self.relayfee*COIN))
+        self.nodes[0].prioritisetransaction(tx_id, int(self.relayfee*COIN))
 
         self.log.info("Assert that prioritised free transaction is accepted to mempool")
-        assert_equal(self.nodes[0].sendrawtransaction(tx2_hex), tx2_id)
-        assert(tx2_id in self.nodes[0].getrawmempool())
+        assert_equal(self.nodes[0].sendrawtransaction(tx_hex), tx_id)
+        assert(tx_id in self.nodes[0].getrawmempool())
 
         # Test that calling prioritisetransaction is sufficient to trigger
         # getblocktemplate to (eventually) return a new block.
         mock_time = get_mocktime()
         self.nodes[0].setmocktime(mock_time)
         template = self.nodes[0].getblocktemplate()
-        self.nodes[0].prioritisetransaction(tx2_id, 0, -int(self.relayfee*COIN))
+        self.nodes[0].prioritisetransaction(tx2_id, -int(self.relayfee*COIN))
         self.nodes[0].setmocktime(mock_time+10)
         new_template = self.nodes[0].getblocktemplate()
 

@@ -66,10 +66,11 @@ def small_txpuzzle_randfee(from_node, conflist, unconflist, amount, min_fee, fee
 
 def split_inputs(from_node, txins, txouts, initial_split = False):
     """
-    We need to generate a lot of very small inputs so we can generate a ton of transactions
-    and they will have low priority.
+    We need to generate a lot of inputs so we can generate a ton of transactions.
     This function takes an input from txins, and creates and sends a transaction
     which splits the value into 2 outputs which are appended to txouts.
+    Previously this was designed to be small inputs so they wouldn't have
+    a high coin age when the notion of priority still existed.
     """
     prevtxout = txins.pop()
     tx = CTransaction()
@@ -150,7 +151,7 @@ def __init__(self):
     def setup_network(self):
         """
         We'll setup the network to have 3 nodes that all mine with different parameters.
-        But first we need to use one node to create a lot of small low priority outputs
+        But first we need to use one node to create a lot of outputs
         which we will use to generate our transactions.
         """
         self.nodes = []
@@ -159,7 +160,7 @@ def setup_network(self):
                                                               "-whitelist=127.0.0.1"]))
 
         self.log.info("This test is time consuming, please be patient")
-        self.log.info("Splitting inputs to small size so we can generate low priority tx's")
+        self.log.info("Splitting inputs so we can generate tx's")
         self.txouts = []
         self.txouts2 = []
         # Split a coinbase into two transaction puzzle outputs
@@ -188,18 +189,17 @@ def setup_network(self):
 
         # Now we can connect the other nodes, didn't want to connect them earlier
         # so the estimates would not be affected by the splitting transactions
-        # Node1 mines small blocks but that are bigger than the expected transaction rate,
-        # and allows free transactions.
+        # Node1 mines small blocks but that are bigger than the expected transaction rate.
         # NOTE: the CreateNewBlock code starts counting block size at 1,000 bytes,
         # (17k is room enough for 110 or so transactions)
         self.nodes.append(start_node(1, self.options.tmpdir,
-                                     ["-blockprioritysize=1500", "-blockmaxsize=17000",
+                                     ["-blockmaxsize=17000",
                                       "-maxorphantx=1000"]))
         connect_nodes(self.nodes[1], 0)
 
         # Node2 is a stingy miner, that
         # produces too small blocks (room for only 55 or so transactions)
-        node2args = ["-blockprioritysize=0", "-blockmaxsize=8000", "-maxorphantx=1000"]
+        node2args = ["-blockmaxsize=8000", "-maxorphantx=1000"]
 
         self.nodes.append(start_node(2, self.options.tmpdir, node2args))
         connect_nodes(self.nodes[0], 2)

@@ -501,47 +501,6 @@ def make_change(from_node, amount_in, amount_out, fee):
         outputs[from_node.getnewaddress()] = change
     return outputs
 
-def send_zeropri_transaction(from_node, to_node, amount, fee):
-    """
-    Create&broadcast a zero-priority transaction.
-    Returns (txid, hex-encoded-txdata)
-    Ensures transaction is zero-priority by first creating a send-to-self,
-    then using its output
-    """
-
-    # Create a send-to-self with confirmed inputs:
-    self_address = from_node.getnewaddress()
-    (total_in, inputs) = gather_inputs(from_node, amount+fee*2)
-    outputs = make_change(from_node, total_in, amount+fee, fee)
-    outputs[self_address] = float(amount+fee)
-
-    self_rawtx = from_node.createrawtransaction(inputs, outputs)
-    self_signresult = from_node.signrawtransaction(self_rawtx)
-    self_txid = from_node.sendrawtransaction(self_signresult["hex"], True)
-
-    vout = find_output(from_node, self_txid, amount+fee)
-    # Now immediately spend the output to create a 1-input, 1-output
-    # zero-priority transaction:
-    inputs = [ { "txid" : self_txid, "vout" : vout } ]
-    outputs = { to_node.getnewaddress() : float(amount) }
-
-    rawtx = from_node.createrawtransaction(inputs, outputs)
-    signresult = from_node.signrawtransaction(rawtx)
-    txid = from_node.sendrawtransaction(signresult["hex"], True)
-
-    return (txid, signresult["hex"])
-
-def random_zeropri_transaction(nodes, amount, min_fee, fee_increment, fee_variants):
-    """
-    Create a random zero-priority transaction.
-    Returns (txid, hex-encoded-transaction-data, fee)
-    """
-    from_node = random.choice(nodes)
-    to_node = random.choice(nodes)
-    fee = min_fee + fee_increment*random.randint(0,fee_variants)
-    (txid, txhex) = send_zeropri_transaction(from_node, to_node, amount, fee)
-    return (txid, txhex, fee)
-
 def random_transaction(nodes, amount, min_fee, fee_increment, fee_variants):
     """
     Create a random transaction.

@@ -12,14 +12,13 @@
 static void AddTx(const CTransaction& tx, const CAmount& nFee, CTxMemPool& pool)
 {
     int64_t nTime = 0;
-    double dPriority = 10.0;
     unsigned int nHeight = 1;
     bool spendsCoinbase = false;
     unsigned int sigOpCost = 4;
     LockPoints lp;
     pool.addUnchecked(tx.GetHash(), CTxMemPoolEntry(
-                                        MakeTransactionRef(tx), nFee, nTime, dPriority, nHeight,
-                                        tx.GetValueOut(), spendsCoinbase, sigOpCost, lp));
+                                        MakeTransactionRef(tx), nFee, nTime, nHeight,
+                                        spendsCoinbase, sigOpCost, lp));
 }
 
 // Right now this is only testing eviction performance in an extremely small

@@ -243,24 +243,6 @@ bool CCoinsViewCache::HaveInputs(const CTransaction& tx) const
     return true;
 }
 
-double CCoinsViewCache::GetPriority(const CTransaction &tx, int nHeight, CAmount &inChainInputValue) const
-{
-    inChainInputValue = 0;
-    if (tx.IsCoinBase())
-        return 0.0;
-    double dResult = 0.0;
-    BOOST_FOREACH(const CTxIn& txin, tx.vin)
-    {
-        const Coin& coin = AccessCoin(txin.prevout);
-        if (coin.IsSpent()) continue;
-        if (coin.nHeight <= nHeight) {
-            dResult += (double)coin.out.nValue * (nHeight-coin.nHeight);
-            inChainInputValue += coin.out.nValue;
-        }
-    }
-    return tx.ComputePriority(dResult);
-}
-
 static const size_t MAX_OUTPUTS_PER_BLOCK = MaxBlockSize(true) /  ::GetSerializeSize(CTxOut(), SER_NETWORK, PROTOCOL_VERSION); // TODO: merge with similar definition in undo.h.
 
 const Coin& AccessByTxid(const CCoinsViewCache& view, const uint256& txid)

@@ -280,13 +280,6 @@ class CCoinsViewCache : public CCoinsViewBacked
     //! Check whether all prevouts of the transaction are present in the UTXO set represented by this view
     bool HaveInputs(const CTransaction& tx) const;
 
-    /**
-     * Return priority of tx at height nHeight. Also calculate the sum of the values of the inputs
-     * that are already in the chain.  These are the inputs that will age and increase priority as
-     * new blocks are added to the chain.
-     */
-    double GetPriority(const CTransaction &tx, int nHeight, CAmount &inChainInputValue) const;
-
 private:
     CCoinsMap::iterator FetchCoin(const COutPoint &outpoint) const;