rf-design

Lightweight cross-platform RF circuit simulator — DC, S-parameters, harmonic balance, loadpull. Not a SPICE simulator.

This project shows the design process of the main blocks of a typical RX frontend system.

This project is about building a high FOM 2.4 GHz LNA for Bluetooth Low-Energy (BLE) Standards, using 45nm CMOS technology.

AI-Agent driven RF design system with HFSS automation for antennas, filters and transmission lines

This is a 2.4 GHz LNA project being done for practice using Keysight ADS. This project attempts to automate the design process using python to make it easier.

This project simulates and extracts the Electric (E) and Magnetic (H) field parameters of a dipole antenna using CST Studio Suite. It provides a detailed analysis of the antenna’s field distribution, radiation pattern, and key performance metrics such as impedance and gain.

Web-based radio modelling and planning tool for LoRa networks, developed as part of a bachelor’s thesis. The application integrates the SPLAT! propagation model with an interactive map interface to enable coverage prediction, line-of-sight analysis, and optimal node placement based on real terrain data.

2.4 GHz power amplifier design project featuring analytical matching network calculations in Mathcad, PCB layout in Altium Designer, CAD component integration, and full-wave 3D electromagnetic simulation in CST Studio Suite.

Design, analytical calculation, and 3D electromagnetic simulation of an H10 (TE10) rectangular waveguide section operating at 4.2 GHz (C-band). Includes Mathcad worksheets, SolidWorks CAD/STEP models, CST Studio Suite simulation project, and full technical documentation.

Analytical synthesis (Mathcad) and circuit simulation (Micro-Cap) of a 100 kHz passive LC filter based on Foster's 1st canonical form with a 110 kHz transmission zero and 50 Ohm matched impedance. Released under CERN-OHL-P v2.

Surrogate-assisted optimisation agent for CST Studio Suite: trains a surrogate on your saved full-wave runs, optimises on it with SB-SADEA, and spends each simulation on a frozen, audited prediction. Works on any parametric frequency-domain model whose goals come from 1D results.

Analytical calculations (Mathcad), 3D CAD modeling (SolidWorks, STEP), and electromagnetic simulation (CST Studio Suite) of a microstrip transmission line operating at 1.015 GHz.

2.44 GHz ISM-band microstrip inset-fed patch antenna and 2x2 corporate-fed array designed on Rogers RO4350B substrate. Includes Mathcad analytical synthesis, CST Studio Suite 3D electromagnetic simulations, and mechanical CAD enclosure models licensed under CERN-OHL-P v2.

Collection of DelphiScript/Pascal automation scripts for Altium Designer, specializing in PCB layout optimization, RF/microwave microstrip taper synthesis, and discrete slice merging into solid regions.

Design, analytical synthesis, and numerical simulation (Cadence AWR MWO) of a reactive L-section impedance matching network for the 2SK2974 UHF power MOSFET at 1.2 GHz, transforming complex sub-ohm port impedances to 50-ohm terminals.

Next-generation X-band hybrid SSPP-SIW bandpass filter for B5G wireless communication using ANSYS HFSS and CST Studio Suite. Features independent cutoff frequency tuning and deep stopband rejection (>40 dB)

This repo showcases the design and simulation of a 2.0 GHz Low Noise Amplifier (LNA). It's engineered to boost weak RF signals with minimal added noise, crucial for wireless communication and SDRs. Includes schematics, detailed S-parameter, noise figure, and stability simulation results, plus design documentation.

Analytical design and SPICE circuit simulation of a 10 MHz harmonic LC Colpitts oscillator using an RF N-channel JFET (BF862/BF861A) in common-drain configuration. Includes two-port Y-parameter network calculations, tank synthesis, startup transient analysis, and Open Hardware CERN-OHL-P v2 documentation.

Analytical calculations (Mathcad) and 3D electromagnetic simulation (CST Studio Suite) of a coaxial transmission line designed for 2.4 GHz, including CAD modeling (SolidWorks).

Engineering portfolio — semiconductor, photonics, ML/AI, quantum, and adjacent applied-physics projects. Static site, GitHub Pages.