Reading and writing are made asynchronous - #3
Closed
ToJIka4 wants to merge 3 commits into
Closed
Conversation
lexszero
pushed a commit
that referenced
this pull request
Jan 26, 2017
commit 40a50f8 upstream. TPS65217 IRQ domain should be removed and initialised as NULL when the module is unloaded for the next use. When tps65217.ko is loaded again, it causes the page fault. This patch fixes the error below. root@arm:~# lsmod | grep "tps" tps65217_charger 3538 0 tps65218_pwrbutton 2974 0 tps65217 6710 1 tps65217_charger root@arm:~# modprobe -r tps65217_charger root@arm:~# modprobe tps65217.ko [ 71.990277] Unable to handle kernel paging request at virtual address bf055944 [ 71.998063] pgd = dd3a4000 [ 72.000904] [bf055944] *pgd=9e6f7811, *pte=00000000, *ppte=00000000 [ 72.007567] Internal error: Oops: 7 [#1] SMP ARM [ 72.012404] Modules linked in: tps65217(+) evdev musb_dsps musb_hdrc udc_core tps65218_pwrbutton usbcore phy_am335] [ 72.055700] CPU: 0 PID: 243 Comm: modprobe Not tainted 4.9.0-rc5-next-20161114 #3 [ 72.063531] Hardware name: Generic AM33XX (Flattened Device Tree) [ 72.069899] task: de714380 task.stack: de7e6000 [ 72.074655] PC is at irq_find_matching_fwspec+0x88/0x100 [ 72.080211] LR is at 0xde7e79d8 [ 72.083496] pc : [<c01a5d88>] lr : [<de7e79d8>] psr: 200e0013 [ 72.083496] sp : de7e7a78 ip : 00000000 fp : dd138a68 [ 72.095506] r10: c0ca04f8 r9 : 00000018 r8 : de7e7ab8 [ 72.100973] r7 : 00000001 r6 : c0c4517c r5 : df963f68 r4 : de321980 [ 72.107797] r3 : bf055940 r2 : de714380 r1 : 00000000 r0 : 00000000 [ 72.114633] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 72.122084] Control: 10c5387d Table: 9d3a4019 DAC: 00000051 [ 72.128097] Process modprobe (pid: 243, stack limit = 0xde7e6218) [ 72.134489] Stack: (0xde7e7a78 to 0xde7e8000) [ 72.139060] 7a60: df963f68 de7e7ab8 [ 72.147643] 7a80: 00000000 dd0e1000 dd491e20 c01a6ea0 600e0013 c01a5dc0 dd138a68 c0c45138 [ 72.156216] 7aa0: df963f68 00000000 df963f68 dd0e1010 00000000 c01a71a4 df963f68 00000001 [ 72.164800] 7ac0: 00000002 de7e7ac0 c80048b8 dd0adf00 df963f68 c0c4517c 00000000 de7e7b50 [ 72.173369] 7ae0: 00000018 c0ca04f8 dd138a68 c01a5dc0 df963f68 dd0e1010 00000000 dd0e1000 [ 72.181942] 7b00: dd491e20 c0653a70 df963f58 00000001 00000002 00000000 00000000 00000000 [ 72.190522] 7b20: 600e0093 c0cbf8f0 c0c0512c c0193674 00000001 00000080 00000000 c0554984 [ 72.199096] 7b40: 00000000 00000000 800e0013 c0553858 df963f68 00000000 00000000 00000000 [ 72.207674] 7b60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 72.216239] 7b80: 00000000 00000000 00000000 00000000 00000000 00000000 dd0e1000 c0544d24 [ 72.224816] 7ba0: dd491e10 dd0e1010 dd16e800 bf1d517c bf1d5620 dd0e1010 c1497ed4 bf1d5620 [ 72.233398] 7bc0: dd0e1010 fffffdfb bf1d5620 bf1d5620 00000000 c054537c c0545330 dd0e1010 [ 72.241967] 7be0: c1497ed4 00000000 bf1d5620 c05433ac 00000000 00000000 de7e7c28 c0543570 [ 72.250537] 7c00: 00000001 c1497e90 00000000 c0541884 de080cd4 dd44b7d4 dd0e1010 dd0e1010 [ 72.259109] 7c20: dd0e1044 c05430c8 dd0e1010 00000001 dd0e1010 dd0e1018 dd0e1010 c0c9e328 [ 72.267676] 7c40: de5d4020 c0542760 dd0e1018 dd0e1010 00000000 c0540ba8 dd138a40 c048dec4 [ 72.276253] 7c60: 00000000 dd0e1000 00000001 dd0e1000 dd0e1010 dd0e1000 bf233de0 dd138a40 [ 72.284829] 7c80: dd0e1010 c05450a0 000000bf 00000000 dd138a60 00000001 dd0e1000 c0571240 [ 72.293398] 7ca0: 00000000 dd1ce9c0 00000040 dd1ce9cc bf233de0 00000003 de5d4020 ffffffff [ 72.301969] 7cc0: 00000004 dd0adf00 00000000 c0571408 00000000 00000000 dd0adf00 de5d4020 [ 72.310543] 7ce0: c057146c dd1ce9c0 bf233d14 de5d4020 de7fb3d0 00000004 bf233d14 ffffffff [ 72.319120] 7d00: 00000018 dd49bf30 c01cedc0 c05714d0 00000000 00000000 dd0adf00 de322810 [ 72.327692] 7d20: de322810 00000000 dd033000 000000f0 00000001 bf2333fc 00000000 00000000 [ 72.336269] 7d40: dd0adf00 de5d4020 000000b6 bf233e40 de5d4020 bf233968 de5d4004 de5d4000 [ 72.344848] 7d60: bf233314 c06148ac de5d4020 c1497ed4 00000000 bf233e40 00000000 c05433ac [ 72.353422] 7d80: 00000000 de5d4020 bf233e40 de5d4054 00000000 bf236000 00000000 c0543538 [ 72.362002] 7da0: 00000000 bf233e40 c0543484 c05417e4 de1442a4 de5d04d0 bf233e40 de321300 [ 72.370582] 7dc0: c0caa5a4 c05429fc bf233be0 bf233e40 c0cbfa44 bf233e40 c0cbfa44 dd2f7740 [ 72.379148] 7de0: bf233f00 c05442f0 bf233e8c bf233e24 c0cbfa44 c0615ae0 00000000 bf233f00 [ 72.387718] 7e00: c0cbfa44 c010186c 200f0013 c0191650 de714380 00000000 600f0013 00000040 [ 72.396286] 7e20: dd2f7740 c018f1ac 00000001 c0c8356c 024000c0 c01a8854 c0c56e0e c028225c [ 72.404863] 7e40: dd2f7740 c0191984 de714380 dd2f7740 00000001 bf233f00 bf233f00 c0cbfa44 [ 72.413440] 7e60: dd2f7740 bf233f00 00000001 dd49bf08 dd49bf30 c0230998 00000001 c0c8356c [ 72.421997] 7e80: c0c4c536 c0cbfa44 c0c0512c c01d2070 bf233f0c 00007fff bf233f00 c01cf5b8 [ 72.430570] 7ea0: 00000000 c1475134 c01cee34 bf23411c bf233f48 bf234054 bf234150 00000000 [ 72.439144] 7ec0: 024002c2 de7fbf40 0009bc20 c02776ac ff800000 00000000 00000000 bf233670 [ 72.447723] 7ee0: 00000004 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 72.456298] 7f00: 00000000 00000000 00000000 00000000 c01d2590 0000aa41 00000000 00000000 [ 72.464862] 7f20: 000b2549 e12c3a41 00000051 de7e6000 0009bc20 c01d2630 00000530 e12b9000 [ 72.473438] 7f40: 0000aa41 e12c1434 e12c1211 e12c336c 00001150 00001620 00000000 00000000 [ 72.482003] 7f60: 00000000 000010fc 00000035 00000036 0000001d 0000001a 00000017 00000000 [ 72.490564] 7f80: de7e6000 3ba39a00 0009b008 0009b718 00000080 c0107704 de7e6000 00000000 [ 72.499141] 7fa0: 0009f609 c0107560 3ba39a00 0009b008 000a7b08 0000aa41 0009bc20 0000aa41 [ 72.507717] 7fc0: 3ba39a00 0009b008 0009b718 00000080 00000001 00000008 0009ab14 0009f609 [ 72.516290] 7fe0: bea31ab8 bea31aa8 0001e5eb b6e83b42 800f0030 000a7b08 0000ffff 0840ffff [ 72.524883] [<c01a5d88>] (irq_find_matching_fwspec) from [<c01a6ea0>] (irq_create_fwspec_mapping+0x28/0x2e0) [ 72.535174] [<c01a6ea0>] (irq_create_fwspec_mapping) from [<c01a71a4>] (irq_create_of_mapping+0x4c/0x54) [ 72.545115] [<c01a71a4>] (irq_create_of_mapping) from [<c0653a70>] (of_irq_get+0x58/0x68) [ 72.553699] [<c0653a70>] (of_irq_get) from [<c0544d24>] (platform_get_irq+0x1c/0xec) [ 72.561828] [<c0544d24>] (platform_get_irq) from [<bf1d517c>] (tps6521x_pb_probe+0xd0/0x1a8 [tps65218_pwrbutton]) [ 72.572581] [<bf1d517c>] (tps6521x_pb_probe [tps65218_pwrbutton]) from [<c054537c>] (platform_drv_probe+0x4c/0xac) [ 72.583426] [<c054537c>] (platform_drv_probe) from [<c05433ac>] (driver_probe_device+0x204/0x2dc) [ 72.592729] [<c05433ac>] (driver_probe_device) from [<c0541884>] (bus_for_each_drv+0x58/0x8c) [ 72.601657] [<c0541884>] (bus_for_each_drv) from [<c05430c8>] (__device_attach+0xb0/0x114) [ 72.610324] [<c05430c8>] (__device_attach) from [<c0542760>] (bus_probe_device+0x88/0x90) [ 72.618898] [<c0542760>] (bus_probe_device) from [<c0540ba8>] (device_add+0x3b8/0x560) [ 72.627203] [<c0540ba8>] (device_add) from [<c05450a0>] (platform_device_add+0xa8/0x208) [ 72.635693] [<c05450a0>] (platform_device_add) from [<c0571240>] (mfd_add_device+0x240/0x338) [ 72.644634] [<c0571240>] (mfd_add_device) from [<c0571408>] (mfd_add_devices+0xa0/0x104) [ 72.653120] [<c0571408>] (mfd_add_devices) from [<c05714d0>] (devm_mfd_add_devices+0x60/0xa8) [ 72.662077] [<c05714d0>] (devm_mfd_add_devices) from [<bf2333fc>] (tps65217_probe+0xe8/0x2ec [tps65217]) [ 72.672026] [<bf2333fc>] (tps65217_probe [tps65217]) from [<c06148ac>] (i2c_device_probe+0x168/0x1f4) [ 72.681695] [<c06148ac>] (i2c_device_probe) from [<c05433ac>] (driver_probe_device+0x204/0x2dc) [ 72.690816] [<c05433ac>] (driver_probe_device) from [<c0543538>] (__driver_attach+0xb4/0xb8) [ 72.699657] [<c0543538>] (__driver_attach) from [<c05417e4>] (bus_for_each_dev+0x60/0x94) [ 72.708224] [<c05417e4>] (bus_for_each_dev) from [<c05429fc>] (bus_add_driver+0x18c/0x214) [ 72.716892] [<c05429fc>] (bus_add_driver) from [<c05442f0>] (driver_register+0x78/0xf8) [ 72.725280] [<c05442f0>] (driver_register) from [<c0615ae0>] (i2c_register_driver+0x38/0x80) [ 72.734120] [<c0615ae0>] (i2c_register_driver) from [<c010186c>] (do_one_initcall+0x3c/0x178) [ 72.743055] [<c010186c>] (do_one_initcall) from [<c0230998>] (do_init_module+0x5c/0x1d0) [ 72.751537] [<c0230998>] (do_init_module) from [<c01d2070>] (load_module+0x1d10/0x21c0) [ 72.759933] [<c01d2070>] (load_module) from [<c01d2630>] (SyS_init_module+0x110/0x154) [ 72.768242] [<c01d2630>] (SyS_init_module) from [<c0107560>] (ret_fast_syscall+0x0/0x1c) [ 72.776725] Code: e5944000 e1540006 0a00001b e594300c (e593c004) [ 72.783181] ---[ end trace 0278ec325f4689b8 ]--- Fixes: 6556bda ("mfd: tps65217: Add support for IRQs") Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lexszero
pushed a commit
that referenced
this pull request
Jan 26, 2017
commit 546d87e upstream. Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 IP: _raw_spin_lock+0xc/0x30 PGD 3e28eb067 PUD 3f0ac6067 PMD 0 Oops: 0002 [#1] SMP CPU: 0 PID: 2431 Comm: test Tainted: G OE 4.10.0-rc1+ #3 Call Trace: ? kvm_ioapic_scan_entry+0x3e/0x110 [kvm] kvm_arch_vcpu_ioctl_run+0x10a8/0x15f0 [kvm] ? pick_next_task_fair+0xe1/0x4e0 ? kvm_arch_vcpu_load+0xea/0x260 [kvm] kvm_vcpu_ioctl+0x33a/0x600 [kvm] ? hrtimer_try_to_cancel+0x29/0x130 ? do_nanosleep+0x97/0xf0 do_vfs_ioctl+0xa1/0x5d0 ? __hrtimer_init+0x90/0x90 ? do_nanosleep+0x5b/0xf0 SyS_ioctl+0x79/0x90 do_syscall_64+0x6e/0x180 entry_SYSCALL64_slow_path+0x25/0x25 RIP: _raw_spin_lock+0xc/0x30 RSP: ffffa43688973cc0 The syzkaller folks reported a NULL pointer dereference due to ENABLE_CAP succeeding even without an irqchip. The Hyper-V synthetic interrupt controller is activated, resulting in a wrong request to rescan the ioapic and a NULL pointer dereference. #include <sys/ioctl.h> #include <sys/mman.h> #include <sys/types.h> #include <linux/kvm.h> #include <pthread.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #ifndef KVM_CAP_HYPERV_SYNIC #define KVM_CAP_HYPERV_SYNIC 123 #endif void* thr(void* arg) { struct kvm_enable_cap cap; cap.flags = 0; cap.cap = KVM_CAP_HYPERV_SYNIC; ioctl((long)arg, KVM_ENABLE_CAP, &cap); return 0; } int main() { void *host_mem = mmap(0, 0x1000, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); int kvmfd = open("/dev/kvm", 0); int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0); struct kvm_userspace_memory_region memreg; memreg.slot = 0; memreg.flags = 0; memreg.guest_phys_addr = 0; memreg.memory_size = 0x1000; memreg.userspace_addr = (unsigned long)host_mem; host_mem[0] = 0xf4; ioctl(vmfd, KVM_SET_USER_MEMORY_REGION, &memreg); int cpufd = ioctl(vmfd, KVM_CREATE_VCPU, 0); struct kvm_sregs sregs; ioctl(cpufd, KVM_GET_SREGS, &sregs); sregs.cr0 = 0; sregs.cr4 = 0; sregs.efer = 0; sregs.cs.selector = 0; sregs.cs.base = 0; ioctl(cpufd, KVM_SET_SREGS, &sregs); struct kvm_regs regs = { .rflags = 2 }; ioctl(cpufd, KVM_SET_REGS, ®s); ioctl(vmfd, KVM_CREATE_IRQCHIP, 0); pthread_t th; pthread_create(&th, 0, thr, (void*)(long)cpufd); usleep(rand() % 10000); ioctl(cpufd, KVM_RUN, 0); pthread_join(th, 0); return 0; } This patch fixes it by failing ENABLE_CAP if without an irqchip. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 5c91941 (kvm/x86: Hyper-V synthetic interrupt controller) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lexszero
pushed a commit
that referenced
this pull request
Apr 5, 2017
commit f222449 upstream. We cannot do printk() from tk_debug_account_sleep_time(), because tk_debug_account_sleep_time() is called under tk_core seq lock. The reason why printk() is unsafe there is that console_sem may invoke scheduler (up()->wake_up_process()->activate_task()), which, in turn, can return back to timekeeping code, for instance, via get_time()->ktime_get(), deadlocking the system on tk_core seq lock. [ 48.950592] ====================================================== [ 48.950622] [ INFO: possible circular locking dependency detected ] [ 48.950622] 4.10.0-rc7-next-20170213+ #101 Not tainted [ 48.950622] ------------------------------------------------------- [ 48.950622] kworker/0:0/3 is trying to acquire lock: [ 48.950653] (tk_core){----..}, at: [<c01cc624>] retrigger_next_event+0x4c/0x90 [ 48.950683] but task is already holding lock: [ 48.950683] (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90 [ 48.950714] which lock already depends on the new lock. [ 48.950714] the existing dependency chain (in reverse order) is: [ 48.950714] -> #5 (hrtimer_bases.lock){-.-...}: [ 48.950744] _raw_spin_lock_irqsave+0x50/0x64 [ 48.950775] lock_hrtimer_base+0x28/0x58 [ 48.950775] hrtimer_start_range_ns+0x20/0x5c8 [ 48.950775] __enqueue_rt_entity+0x320/0x360 [ 48.950805] enqueue_rt_entity+0x2c/0x44 [ 48.950805] enqueue_task_rt+0x24/0x94 [ 48.950836] ttwu_do_activate+0x54/0xc0 [ 48.950836] try_to_wake_up+0x248/0x5c8 [ 48.950836] __setup_irq+0x420/0x5f0 [ 48.950836] request_threaded_irq+0xdc/0x184 [ 48.950866] devm_request_threaded_irq+0x58/0xa4 [ 48.950866] omap_i2c_probe+0x530/0x6a0 [ 48.950897] platform_drv_probe+0x50/0xb0 [ 48.950897] driver_probe_device+0x1f8/0x2cc [ 48.950897] __driver_attach+0xc0/0xc4 [ 48.950927] bus_for_each_dev+0x6c/0xa0 [ 48.950927] bus_add_driver+0x100/0x210 [ 48.950927] driver_register+0x78/0xf4 [ 48.950958] do_one_initcall+0x3c/0x16c [ 48.950958] kernel_init_freeable+0x20c/0x2d8 [ 48.950958] kernel_init+0x8/0x110 [ 48.950988] ret_from_fork+0x14/0x24 [ 48.950988] -> #4 (&rt_b->rt_runtime_lock){-.-...}: [ 48.951019] _raw_spin_lock+0x40/0x50 [ 48.951019] rq_offline_rt+0x9c/0x2bc [ 48.951019] set_rq_offline.part.2+0x2c/0x58 [ 48.951049] rq_attach_root+0x134/0x144 [ 48.951049] cpu_attach_domain+0x18c/0x6f4 [ 48.951049] build_sched_domains+0xba4/0xd80 [ 48.951080] sched_init_smp+0x68/0x10c [ 48.951080] kernel_init_freeable+0x160/0x2d8 [ 48.951080] kernel_init+0x8/0x110 [ 48.951080] ret_from_fork+0x14/0x24 [ 48.951110] -> #3 (&rq->lock){-.-.-.}: [ 48.951110] _raw_spin_lock+0x40/0x50 [ 48.951141] task_fork_fair+0x30/0x124 [ 48.951141] sched_fork+0x194/0x2e0 [ 48.951141] copy_process.part.5+0x448/0x1a20 [ 48.951171] _do_fork+0x98/0x7e8 [ 48.951171] kernel_thread+0x2c/0x34 [ 48.951171] rest_init+0x1c/0x18c [ 48.951202] start_kernel+0x35c/0x3d4 [ 48.951202] 0x8000807c [ 48.951202] -> #2 (&p->pi_lock){-.-.-.}: [ 48.951232] _raw_spin_lock_irqsave+0x50/0x64 [ 48.951232] try_to_wake_up+0x30/0x5c8 [ 48.951232] up+0x4c/0x60 [ 48.951263] __up_console_sem+0x2c/0x58 [ 48.951263] console_unlock+0x3b4/0x650 [ 48.951263] vprintk_emit+0x270/0x474 [ 48.951293] vprintk_default+0x20/0x28 [ 48.951293] printk+0x20/0x30 [ 48.951324] kauditd_hold_skb+0x94/0xb8 [ 48.951324] kauditd_thread+0x1a4/0x56c [ 48.951324] kthread+0x104/0x148 [ 48.951354] ret_from_fork+0x14/0x24 [ 48.951354] -> #1 ((console_sem).lock){-.....}: [ 48.951385] _raw_spin_lock_irqsave+0x50/0x64 [ 48.951385] down_trylock+0xc/0x2c [ 48.951385] __down_trylock_console_sem+0x24/0x80 [ 48.951385] console_trylock+0x10/0x8c [ 48.951416] vprintk_emit+0x264/0x474 [ 48.951416] vprintk_default+0x20/0x28 [ 48.951416] printk+0x20/0x30 [ 48.951446] tk_debug_account_sleep_time+0x5c/0x70 [ 48.951446] __timekeeping_inject_sleeptime.constprop.3+0x170/0x1a0 [ 48.951446] timekeeping_resume+0x218/0x23c [ 48.951477] syscore_resume+0x94/0x42c [ 48.951477] suspend_enter+0x554/0x9b4 [ 48.951477] suspend_devices_and_enter+0xd8/0x4b4 [ 48.951507] enter_state+0x934/0xbd4 [ 48.951507] pm_suspend+0x14/0x70 [ 48.951507] state_store+0x68/0xc8 [ 48.951538] kernfs_fop_write+0xf4/0x1f8 [ 48.951538] __vfs_write+0x1c/0x114 [ 48.951538] vfs_write+0xa0/0x168 [ 48.951568] SyS_write+0x3c/0x90 [ 48.951568] __sys_trace_return+0x0/0x10 [ 48.951568] -> #0 (tk_core){----..}: [ 48.951599] lock_acquire+0xe0/0x294 [ 48.951599] ktime_get_update_offsets_now+0x5c/0x1d4 [ 48.951629] retrigger_next_event+0x4c/0x90 [ 48.951629] on_each_cpu+0x40/0x7c [ 48.951629] clock_was_set_work+0x14/0x20 [ 48.951660] process_one_work+0x2b4/0x808 [ 48.951660] worker_thread+0x3c/0x550 [ 48.951660] kthread+0x104/0x148 [ 48.951690] ret_from_fork+0x14/0x24 [ 48.951690] other info that might help us debug this: [ 48.951690] Chain exists of: tk_core --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock [ 48.951721] Possible unsafe locking scenario: [ 48.951721] CPU0 CPU1 [ 48.951721] ---- ---- [ 48.951721] lock(hrtimer_bases.lock); [ 48.951751] lock(&rt_b->rt_runtime_lock); [ 48.951751] lock(hrtimer_bases.lock); [ 48.951751] lock(tk_core); [ 48.951782] *** DEADLOCK *** [ 48.951782] 3 locks held by kworker/0:0/3: [ 48.951782] #0: ("events"){.+.+.+}, at: [<c0156590>] process_one_work+0x1f8/0x808 [ 48.951812] #1: (hrtimer_work){+.+...}, at: [<c0156590>] process_one_work+0x1f8/0x808 [ 48.951843] #2: (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90 [ 48.951843] stack backtrace: [ 48.951873] CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.10.0-rc7-next-20170213+ [ 48.951904] Workqueue: events clock_was_set_work [ 48.951904] [<c0110208>] (unwind_backtrace) from [<c010c224>] (show_stack+0x10/0x14) [ 48.951934] [<c010c224>] (show_stack) from [<c04ca6c0>] (dump_stack+0xac/0xe0) [ 48.951934] [<c04ca6c0>] (dump_stack) from [<c019b5cc>] (print_circular_bug+0x1d0/0x308) [ 48.951965] [<c019b5cc>] (print_circular_bug) from [<c019d2a8>] (validate_chain+0xf50/0x1324) [ 48.951965] [<c019d2a8>] (validate_chain) from [<c019ec18>] (__lock_acquire+0x468/0x7e8) [ 48.951995] [<c019ec18>] (__lock_acquire) from [<c019f634>] (lock_acquire+0xe0/0x294) [ 48.951995] [<c019f634>] (lock_acquire) from [<c01d0ea0>] (ktime_get_update_offsets_now+0x5c/0x1d4) [ 48.952026] [<c01d0ea0>] (ktime_get_update_offsets_now) from [<c01cc624>] (retrigger_next_event+0x4c/0x90) [ 48.952026] [<c01cc624>] (retrigger_next_event) from [<c01e4e24>] (on_each_cpu+0x40/0x7c) [ 48.952056] [<c01e4e24>] (on_each_cpu) from [<c01cafc4>] (clock_was_set_work+0x14/0x20) [ 48.952056] [<c01cafc4>] (clock_was_set_work) from [<c015664c>] (process_one_work+0x2b4/0x808) [ 48.952087] [<c015664c>] (process_one_work) from [<c0157774>] (worker_thread+0x3c/0x550) [ 48.952087] [<c0157774>] (worker_thread) from [<c015d644>] (kthread+0x104/0x148) [ 48.952087] [<c015d644>] (kthread) from [<c0107830>] (ret_from_fork+0x14/0x24) Replace printk() with printk_deferred(), which does not call into the scheduler. Fixes: 0bf43f1 ("timekeeping: Prints the amounts of time spent during suspend") Reported-and-tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lexszero
pushed a commit
that referenced
this pull request
Apr 5, 2017
[ Upstream commit 2bd624b ] Commit 6664498 ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498 ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lexszero
pushed a commit
that referenced
this pull request
Apr 5, 2017
commit c755e25 upstream. The xattr_sem deadlock problems fixed in commit 2e81a4e: "ext4: avoid deadlock when expanding inode size" didn't include the use of xattr_sem in fs/ext4/inline.c. With the addition of project quota which added a new extra inode field, this exposed deadlocks in the inline_data code similar to the ones fixed by 2e81a4e. The deadlock can be reproduced via: dmesg -n 7 mke2fs -t ext4 -O inline_data -Fq -I 256 /dev/vdc 32768 mount -t ext4 -o debug_want_extra_isize=24 /dev/vdc /vdc mkdir /vdc/a umount /vdc mount -t ext4 /dev/vdc /vdc echo foo > /vdc/a/foo and looks like this: [ 11.158815] [ 11.160276] ============================================= [ 11.161960] [ INFO: possible recursive locking detected ] [ 11.161960] 4.10.0-rc3-00015-g011b30a8a3cf #160 Tainted: G W [ 11.161960] --------------------------------------------- [ 11.161960] bash/2519 is trying to acquire lock: [ 11.161960] (&ei->xattr_sem){++++..}, at: [<c1225a4b>] ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] [ 11.161960] but task is already holding lock: [ 11.161960] (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152 [ 11.161960] [ 11.161960] other info that might help us debug this: [ 11.161960] Possible unsafe locking scenario: [ 11.161960] [ 11.161960] CPU0 [ 11.161960] ---- [ 11.161960] lock(&ei->xattr_sem); [ 11.161960] lock(&ei->xattr_sem); [ 11.161960] [ 11.161960] *** DEADLOCK *** [ 11.161960] [ 11.161960] May be due to missing lock nesting notation [ 11.161960] [ 11.161960] 4 locks held by bash/2519: [ 11.161960] #0: (sb_writers#3){.+.+.+}, at: [<c11a2414>] mnt_want_write+0x1e/0x3e [ 11.161960] #1: (&type->i_mutex_dir_key){++++++}, at: [<c119508b>] path_openat+0x338/0x67a [ 11.161960] #2: (jbd2_handle){++++..}, at: [<c123314a>] start_this_handle+0x582/0x622 [ 11.161960] #3: (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152 [ 11.161960] [ 11.161960] stack backtrace: [ 11.161960] CPU: 0 PID: 2519 Comm: bash Tainted: G W 4.10.0-rc3-00015-g011b30a8a3cf #160 [ 11.161960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014 [ 11.161960] Call Trace: [ 11.161960] dump_stack+0x72/0xa3 [ 11.161960] __lock_acquire+0xb7c/0xcb9 [ 11.161960] ? kvm_clock_read+0x1f/0x29 [ 11.161960] ? __lock_is_held+0x36/0x66 [ 11.161960] ? __lock_is_held+0x36/0x66 [ 11.161960] lock_acquire+0x106/0x18a [ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] down_write+0x39/0x72 [ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] ? _raw_read_unlock+0x22/0x2c [ 11.161960] ? jbd2_journal_extend+0x1e2/0x262 [ 11.161960] ? __ext4_journal_get_write_access+0x3d/0x60 [ 11.161960] ext4_mark_inode_dirty+0x17d/0x26d [ 11.161960] ? ext4_add_dirent_to_inline.isra.12+0xa5/0xb2 [ 11.161960] ext4_add_dirent_to_inline.isra.12+0xa5/0xb2 [ 11.161960] ext4_try_add_inline_entry+0x69/0x152 [ 11.161960] ext4_add_entry+0xa3/0x848 [ 11.161960] ? __brelse+0x14/0x2f [ 11.161960] ? _raw_spin_unlock_irqrestore+0x44/0x4f [ 11.161960] ext4_add_nondir+0x17/0x5b [ 11.161960] ext4_create+0xcf/0x133 [ 11.161960] ? ext4_mknod+0x12f/0x12f [ 11.161960] lookup_open+0x39e/0x3fb [ 11.161960] ? __wake_up+0x1a/0x40 [ 11.161960] ? lock_acquire+0x11e/0x18a [ 11.161960] path_openat+0x35c/0x67a [ 11.161960] ? sched_clock_cpu+0xd7/0xf2 [ 11.161960] do_filp_open+0x36/0x7c [ 11.161960] ? _raw_spin_unlock+0x22/0x2c [ 11.161960] ? __alloc_fd+0x169/0x173 [ 11.161960] do_sys_open+0x59/0xcc [ 11.161960] SyS_open+0x1d/0x1f [ 11.161960] do_int80_syscall_32+0x4f/0x61 [ 11.161960] entry_INT80_32+0x2f/0x2f [ 11.161960] EIP: 0xb76ad469 [ 11.161960] EFLAGS: 00000286 CPU: 0 [ 11.161960] EAX: ffffffda EBX: 08168ac8 ECX: 00008241 EDX: 000001b6 [ 11.161960] ESI: b75e46bc EDI: b7755000 EBP: bfbdb108 ESP: bfbdafc0 [ 11.161960] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Reported-by: George Spelvin <linux@sciencehorizons.net> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lexszero
pushed a commit
that referenced
this pull request
Apr 5, 2017
commit 9cf6cdb upstream. Fixes a regression triggered by a change in the layout of struct iio_chan_spec, but the real bug is in the driver which assumed a specific structure layout in the first place. Hint: the two bits were not OR:ed together as implied by the indentation prior to this patch, there was a comma between them, which accidentally moved the ..._SCALE bit to the next structure field. That field was .info_mask_shared_by_type before the _available attributes was added by commit 5123960 ("iio:core: add a callback to allow drivers to provide _available attributes") and .info_mask_separate_available afterwards, and the regression happened. info_mask_shared_by_type is actually a better choice than the originally intended info_mask_separate for the ..._SCALE bit since a constant is returned from mpl3115_read_raw for the scale. Using info_mask_shared_by_type also preserves the behavior from before the regression and is therefore less likely to cause other interesting side effects. The above mentioned regression causes an unintended sysfs attibute to show up that is not backed by code, in turn causing the following NULL pointer defererence to happen on access. Segmentation fault Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ecc3c000 [00000000] *pgd=87f91831 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: CPU: 1 PID: 1051 Comm: cat Not tainted 4.10.0-rc5-00009-gffd8858-dirty #3 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: ed54ec00 task.stack: ee2bc000 PC is at 0x0 LR is at iio_read_channel_info_avail+0x40/0x280 pc : [<00000000>] lr : [<c06fbc1c>] psr: a0070013 sp : ee2bdda8 ip : 00000000 fp : ee2bddf4 r10: c0a53c74 r9 : ed79f000 r8 : ee8d1018 r7 : 00001000 r6 : 00000fff r5 : ee8b9a00 r4 : ed79f000 r3 : ee2bddc4 r2 : ee2bddbc r1 : c0a86dcc r0 : ee8d1000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 3cc3c04a DAC: 00000051 Process cat (pid: 1051, stack limit = 0xee2bc210) Stack: (0xee2bdda8 to 0xee2be000) dda0: ee2bddc0 00000002 c016d720 c016d394 ed54ec00 00000000 ddc0: 60070013 ed413780 00000001 edffd480 ee8b9a00 00000fff 00001000 ee8d1018 dde0: ed79f000 c0a53c74 ee2bde0c ee2bddf8 c0513c58 c06fbbe8 edffd480 edffd540 de00: ee2bde3c ee2bde10 c0293474 c0513c40 c02933e4 ee2bde60 00000001 ed413780 de20: 00000001 ed413780 00000000 edffd480 ee2bde4c ee2bde40 c0291d00 c02933f0 de40: ee2bde9c ee2bde50 c024679c c0291ce0 edffd4b0 b6e37000 00020000 ee2bdf78 de60: 00000000 00000000 ed54ec00 ed013200 00000817 c0a111fc edffd540 ed413780 de80: b6e37000 00020000 00020000 ee2bdf78 ee2bded4 ee2bdea0 c0292890 c0246604 dea0: c0117940 c016ba50 00000025 c0a111fc b6e37000 ed413780 ee2bdf78 00020000 dec0: ee2bc000 b6e37000 ee2bdf44 ee2bded8 c021d158 c0292770 c0117764 b6e36004 dee0: c0f0d7c4 ee2bdfb0 b6f89228 00021008 ee2bdfac ee2bdf00 c0101374 c0117770 df00: 00000000 00000000 ee2bc000 00000000 ee2bdf34 ee2bdf20 c016ba04 c0171080 df20: 00000000 00020000 ed413780 b6e37000 00000000 ee2bdf78 ee2bdf74 ee2bdf48 df40: c021e7a0 c021d130 c023e300 c023e280 ee2bdf74 00000000 00000000 ed413780 df60: ed413780 00020000 ee2bdfa4 ee2bdf78 c021e870 c021e71c 00000000 00000000 df80: 00020000 00020000 b6e37000 00000003 c0108084 00000000 00000000 ee2bdfa8 dfa0: c0107ee0 c021e838 00020000 00020000 00000003 b6e37000 00020000 0001a2b4 dfc0: 00020000 00020000 b6e37000 00000003 7fffe000 00000000 00000000 00020000 dfe0: 00000000 be98eb4c 0000c740 b6f1985c 60070010 00000003 00000000 00000000 Backtrace: [<c06fbbdc>] (iio_read_channel_info_avail) from [<c0513c58>] (dev_attr_show+0x24/0x50) r10:c0a53c74 r9:ed79f000 r8:ee8d1018 r7:00001000 r6:00000fff r5:ee8b9a00 r4:edffd480 [<c0513c34>] (dev_attr_show) from [<c0293474>] (sysfs_kf_seq_show+0x90/0x110) r5:edffd540 r4:edffd480 [<c02933e4>] (sysfs_kf_seq_show) from [<c0291d00>] (kernfs_seq_show+0x2c/0x30) r10:edffd480 r9:00000000 r8:ed413780 r7:00000001 r6:ed413780 r5:00000001 r4:ee2bde60 r3:c02933e4 [<c0291cd4>] (kernfs_seq_show) from [<c024679c>] (seq_read+0x1a4/0x4e0) [<c02465f8>] (seq_read) from [<c0292890>] (kernfs_fop_read+0x12c/0x1cc) r10:ee2bdf78 r9:00020000 r8:00020000 r7:b6e37000 r6:ed413780 r5:edffd540 r4:c0a111fc [<c0292764>] (kernfs_fop_read) from [<c021d158>] (__vfs_read+0x34/0x118) r10:b6e37000 r9:ee2bc000 r8:00020000 r7:ee2bdf78 r6:ed413780 r5:b6e37000 r4:c0a111fc [<c021d124>] (__vfs_read) from [<c021e7a0>] (vfs_read+0x90/0x11c) r8:ee2bdf78 r7:00000000 r6:b6e37000 r5:ed413780 r4:00020000 [<c021e710>] (vfs_read) from [<c021e870>] (SyS_read+0x44/0x90) r8:00020000 r7:ed413780 r6:ed413780 r5:00000000 r4:00000000 [<c021e82c>] (SyS_read) from [<c0107ee0>] (ret_fast_syscall+0x0/0x1c) r10:00000000 r8:c0108084 r7:00000003 r6:b6e37000 r5:00020000 r4:00020000 Code: bad PC value ---[ end trace 9c4938ccd0389004 ]--- Fixes: cc26ad4 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver") Fixes: 5123960 ("iio:core: add a callback to allow drivers to provide _available attributes") Reported-by: Ken Lin <ken.lin@advantech.com> Tested-by: Ken Lin <ken.lin@advantech.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lexszero
pushed a commit
that referenced
this pull request
Apr 5, 2017
commit 6773386 upstream. Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu and rtl8192c-common: ================================================================== BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] at addr ffff8801c90edb08 Read of size 1 by task kworker/0:1/38 page:ffffea0007243800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000004000(head) page dumped because: kasan: bad access detected CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013 Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi] 0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08 ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297 ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8 Call Trace: [<ffffffff829eea33>] ? dump_stack+0x5c/0x79 [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0 [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb] [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50 [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common] ... The problem is due to rtl8192ce and rtl8192cu sharing routines, and having different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved by placing the struct bt_coexist_info at the head of each of those private areas. Reported-and-tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lexszero
pushed a commit
that referenced
this pull request
Apr 5, 2017
commit 0a6fdbd upstream. Avoid that srp_process_rsp() overwrites the status information in ch if the SRP target response timed out and processing of another task management function has already started. Avoid that issuing multiple task management functions concurrently triggers list corruption. This patch prevents that the following stack trace appears in the system log: WARNING: CPU: 8 PID: 9269 at lib/list_debug.c:52 __list_del_entry_valid+0xbc/0xc0 list_del corruption. prev->next should be ffffc90004bb7b00, but was ffff8804052ecc68 CPU: 8 PID: 9269 Comm: sg_reset Tainted: G W 4.10.0-rc7-dbg+ #3 Call Trace: dump_stack+0x68/0x93 __warn+0xc6/0xe0 warn_slowpath_fmt+0x4a/0x50 __list_del_entry_valid+0xbc/0xc0 wait_for_completion_timeout+0x12e/0x170 srp_send_tsk_mgmt+0x1ef/0x2d0 [ib_srp] srp_reset_device+0x5b/0x110 [ib_srp] scsi_ioctl_reset+0x1c7/0x290 scsi_ioctl+0x12a/0x420 sd_ioctl+0x9d/0x100 blkdev_ioctl+0x51e/0x9f0 block_ioctl+0x38/0x40 do_vfs_ioctl+0x8f/0x700 SyS_ioctl+0x3c/0x70 entry_SYSCALL_64_fastpath+0x18/0xad Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Israel Rukshin <israelr@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Laurence Oberman <loberman@redhat.com> Cc: Steve Feeley <Steve.Feeley@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lexszero
pushed a commit
that referenced
this pull request
Apr 5, 2017
[ Upstream commit d5afb6f ] The code where sk_clone() came from created a new socket and locked it, but then, on the error path didn't unlock it. This problem stayed there for a long while, till b0691c8 ("net: Unlock sock before calling sk_free()") fixed it, but unfortunately the callers of sk_clone() (now sk_clone_locked()) were not audited and the one in dccp_create_openreq_child() remained. Now in the age of the syskaller fuzzer, this was finally uncovered, as reported by Dmitry: ---- 8< ---- I've got the following report while running syzkaller fuzzer on 86292b3 ("Merge branch 'akpm' (patches from Andrew)") [ BUG: held lock freed! ] 4.10.0+ #234 Not tainted ------------------------- syz-executor6/6898 is freeing memory ffff88006286cac0-ffff88006286d3b7, with a lock still held there! (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock include/linux/spinlock.h:299 [inline] (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504 5 locks held by syz-executor6/6898: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] lock_sock include/net/sock.h:1460 [inline] #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] inet_stream_connect+0x44/0xa0 net/ipv4/af_inet.c:681 #1: (rcu_read_lock){......}, at: [<ffffffff83bc1c2a>] inet6_csk_xmit+0x12a/0x5d0 net/ipv6/inet6_connection_sock.c:126 #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_unlink include/linux/skbuff.h:1767 [inline] #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_dequeue include/linux/skbuff.h:1783 [inline] #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] process_backlog+0x264/0x730 net/core/dev.c:4835 #3: (rcu_read_lock){......}, at: [<ffffffff83aeb5c0>] ip6_input_finish+0x0/0x1700 net/ipv6/ip6_input.c:59 #4: (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock include/linux/spinlock.h:299 [inline] #4: (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504 Fix it just like was done by b0691c8 ("net: Unlock sock before calling sk_free()"). Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170301153510.GE15145@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
May 19, 2025
[ Upstream commit 866bafa ] There is a potential deadlock if we do report zones in an IO context, detailed in below lockdep report. When one process do a report zones and another process freezes the block device, the report zones side cannot allocate a tag because the freeze is already started. This can thus result in new block group creation to hang forever, blocking the write path. Thankfully, a new block group should be created on empty zones. So, reporting the zones is not necessary and we can set the write pointer = 0 and load the zone capacity from the block layer using bdev_zone_capacity() helper. ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc1 #252 Not tainted ------------------------------------------------------ modprobe/1110 is trying to acquire lock: ffff888100ac83e0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x38f/0xb60 but task is already holding lock: ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&q->q_usage_counter(queue)#16){++++}-{0:0}: blk_queue_enter+0x3d9/0x500 blk_mq_alloc_request+0x47d/0x8e0 scsi_execute_cmd+0x14f/0xb80 sd_zbc_do_report_zones+0x1c1/0x470 sd_zbc_report_zones+0x362/0xd60 blkdev_report_zones+0x1b1/0x2e0 btrfs_get_dev_zones+0x215/0x7e0 [btrfs] btrfs_load_block_group_zone_info+0x6d2/0x2c10 [btrfs] btrfs_make_block_group+0x36b/0x870 [btrfs] btrfs_create_chunk+0x147d/0x2320 [btrfs] btrfs_chunk_alloc+0x2ce/0xcf0 [btrfs] start_transaction+0xce6/0x1620 [btrfs] btrfs_uuid_scan_kthread+0x4ee/0x5b0 [btrfs] kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #2 (&fs_info->dev_replace.rwsem){++++}-{4:4}: down_read+0x9b/0x470 btrfs_map_block+0x2ce/0x2ce0 [btrfs] btrfs_submit_chunk+0x2d4/0x16c0 [btrfs] btrfs_submit_bbio+0x16/0x30 [btrfs] btree_write_cache_pages+0xb5a/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (&fs_info->zoned_meta_io_lock){+.+.}-{4:4}: __mutex_lock+0x1aa/0x1360 btree_write_cache_pages+0x252/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __lock_acquire+0x2f52/0x5ea0 lock_acquire+0x1b1/0x540 __flush_work+0x3ac/0xb60 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 del_gendisk+0x841/0xa20 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&wb->dwork)->work) --> &fs_info->dev_replace.rwsem --> &q->q_usage_counter(queue)#16 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)#16); lock(&fs_info->dev_replace.rwsem); lock(&q->q_usage_counter(queue)#16); lock((work_completion)(&(&wb->dwork)->work)); *** DEADLOCK *** 5 locks held by modprobe/1110: #0: ffff88811f7bc108 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 #1: ffff8881022ee0e0 (&shost->scan_mutex){+.+.}-{4:4}, at: scsi_remove_host+0x20/0x2a0 #2: ffff88811b4c4378 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 #3: ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130 #4: ffffffffa3284360 (rcu_read_lock){....}-{1:3}, at: __flush_work+0xda/0xb60 stack backtrace: CPU: 0 UID: 0 PID: 1110 Comm: modprobe Not tainted 6.14.0-rc1 #252 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_circular_bug.cold+0x1e0/0x274 check_noncircular+0x306/0x3f0 ? __pfx_check_noncircular+0x10/0x10 ? mark_lock+0xf5/0x1650 ? __pfx_check_irq_usage+0x10/0x10 ? lockdep_lock+0xca/0x1c0 ? __pfx_lockdep_lock+0x10/0x10 __lock_acquire+0x2f52/0x5ea0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 lock_acquire+0x1b1/0x540 ? __flush_work+0x38f/0xb60 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? __flush_work+0x38f/0xb60 __flush_work+0x3ac/0xb60 ? __flush_work+0x38f/0xb60 ? __pfx_mark_lock+0x10/0x10 ? __pfx___flush_work+0x10/0x10 ? __pfx_wq_barrier_func+0x10/0x10 ? __pfx___might_resched+0x10/0x10 ? mark_held_locks+0x94/0xe0 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 ? __pfx_bdi_unregister+0x10/0x10 ? up_write+0x1ba/0x510 del_gendisk+0x841/0xa20 ? __pfx_del_gendisk+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x35/0x60 ? __pm_runtime_resume+0x79/0x110 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] ? kernfs_remove_by_name_ns+0xc0/0xf0 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 ? __pfx___do_sys_delete_module.isra.0+0x10/0x10 ? __pfx_slab_free_after_rcu_debug+0x10/0x10 ? kasan_save_stack+0x2c/0x50 ? kasan_record_aux_stack+0xa3/0xb0 ? __call_rcu_common.constprop.0+0xc4/0xfb0 ? kmem_cache_free+0x3a0/0x590 ? __x64_sys_close+0x78/0xd0 do_syscall_64+0x93/0x180 ? lock_is_held_type+0xd5/0x130 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? lockdep_hardirqs_on+0x78/0x100 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? __pfx___call_rcu_common.constprop.0+0x10/0x10 ? kmem_cache_free+0x3a0/0x590 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? __pfx___x64_sys_openat+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f436712b68b RSP: 002b:00007ffe9f1a8658 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005559b367fd80 RCX: 00007f436712b68b RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005559b367fde8 RBP: 00007ffe9f1a8680 R08: 1999999999999999 R09: 0000000000000000 R10: 00007f43671a5fe0 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ffe9f1a86b0 R14: 0000000000000000 R15: 0000000000000000 </TASK> Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> CC: <stable@vger.kernel.org> # 6.13+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Jun 6, 2025
[ Upstream commit 5da692e ] A cache device failing to resume due to mapping errors should not be retried, as the failure leaves a partially initialized policy object. Repeating the resume operation risks triggering BUG_ON when reloading cache mappings into the incomplete policy object. Reproduce steps: 1. create a cache metadata consisting of 512 or more cache blocks, with some mappings stored in the first array block of the mapping array. Here we use cache_restore v1.0 to build the metadata. cat <<EOF >> cmeta.xml <superblock uuid="" block_size="128" nr_cache_blocks="512" \ policy="smq" hint_width="4"> <mappings> <mapping cache_block="0" origin_block="0" dirty="false"/> </mappings> </superblock> EOF dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2 dmsetup remove cmeta 2. wipe the second array block of the mapping array to simulate data degradations. mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try bringing up the cache device. The resume is expected to fail due to the broken array block. dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dmsetup create cache --notable dmsetup load cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup resume cache 4. try resuming the cache again. An unexpected BUG_ON is triggered while loading cache mappings. dmsetup resume cache Kernel logs: (snip) ------------[ cut here ]------------ kernel BUG at drivers/md/dm-cache-policy-smq.c:752! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 332 Comm: dmsetup Not tainted 6.13.4 #3 RIP: 0010:smq_load_mapping+0x3e5/0x570 Fix by disallowing resume operations for devices that failed the initial attempt. Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Jun 6, 2025
[ Upstream commit 88f7f56 ] When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Jun 9, 2025
[ Upstream commit 5da692e ] A cache device failing to resume due to mapping errors should not be retried, as the failure leaves a partially initialized policy object. Repeating the resume operation risks triggering BUG_ON when reloading cache mappings into the incomplete policy object. Reproduce steps: 1. create a cache metadata consisting of 512 or more cache blocks, with some mappings stored in the first array block of the mapping array. Here we use cache_restore v1.0 to build the metadata. cat <<EOF >> cmeta.xml <superblock uuid="" block_size="128" nr_cache_blocks="512" \ policy="smq" hint_width="4"> <mappings> <mapping cache_block="0" origin_block="0" dirty="false"/> </mappings> </superblock> EOF dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2 dmsetup remove cmeta 2. wipe the second array block of the mapping array to simulate data degradations. mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try bringing up the cache device. The resume is expected to fail due to the broken array block. dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dmsetup create cache --notable dmsetup load cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup resume cache 4. try resuming the cache again. An unexpected BUG_ON is triggered while loading cache mappings. dmsetup resume cache Kernel logs: (snip) ------------[ cut here ]------------ kernel BUG at drivers/md/dm-cache-policy-smq.c:752! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 332 Comm: dmsetup Not tainted 6.13.4 #3 RIP: 0010:smq_load_mapping+0x3e5/0x570 Fix by disallowing resume operations for devices that failed the initial attempt. Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Jun 9, 2025
[ Upstream commit 88f7f56 ] When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Jul 24, 2025
[ Upstream commit 2ed25aa ] The issue arises when kzalloc() is invoked while holding umem_mutex or any other lock acquired under umem_mutex. This is problematic because kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke mmu_notifier_invalidate_range_start(). This function can lead to mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again, resulting in a deadlock. The problematic flow: CPU0 | CPU1 ---------------------------------------|------------------------------------------------ mlx5_ib_dereg_mr() | → revoke_mr() | → mutex_lock(&umem_odp->umem_mutex) | | mlx5_mkey_cache_init() | → mutex_lock(&dev->cache.rb_lock) | → mlx5r_cache_create_ent_locked() | → kzalloc(GFP_KERNEL) | → fs_reclaim() | → mmu_notifier_invalidate_range_start() | → mlx5_ib_invalidate_range() | → mutex_lock(&umem_odp->umem_mutex) → cache_ent_find_and_store() | → mutex_lock(&dev->cache.rb_lock) | Additionally, when kzalloc() is called from within cache_ent_find_and_store(), we encounter the same deadlock due to re-acquisition of umem_mutex. Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr() and before acquiring rb_lock. This ensures that we don't hold umem_mutex while performing memory allocations that could trigger the reclaim path. This change prevents the deadlock by ensuring proper lock ordering and avoiding holding locks during memory allocation operations that could trigger the reclaim path. The following lockdep warning demonstrates the deadlock: python3/20557 is trying to acquire lock: ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at: mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] but task is already holding lock: ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x7b/0x1a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x60/0xd0 mem_cgroup_css_alloc+0x6f/0x9b0 cgroup_init_subsys+0xa4/0x240 cgroup_init+0x1c8/0x510 start_kernel+0x747/0x760 x86_64_start_reservations+0x25/0x30 x86_64_start_kernel+0x73/0x80 common_startup_64+0x129/0x138 -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x91/0xd0 __kmalloc_cache_noprof+0x4d/0x4c0 mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib] mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib] mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib] __mlx5_ib_add+0x4b/0x190 [mlx5_ib] mlx5r_probe+0xd9/0x320 [mlx5_ib] auxiliary_bus_probe+0x42/0x70 really_probe+0xdb/0x360 __driver_probe_device+0x8f/0x130 driver_probe_device+0x1f/0xb0 __driver_attach+0xd4/0x1f0 bus_for_each_dev+0x79/0xd0 bus_add_driver+0xf0/0x200 driver_register+0x6e/0xc0 __auxiliary_driver_register+0x6a/0xc0 do_one_initcall+0x5e/0x390 do_init_module+0x88/0x240 init_module_from_file+0x85/0xc0 idempotent_init_module+0x104/0x300 __x64_sys_finit_module+0x68/0xc0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}: __mutex_lock+0x98/0xf10 __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib] mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib] ib_dereg_mr_user+0x85/0x1f0 [ib_core] uverbs_free_mr+0x19/0x30 [ib_uverbs] destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs] uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs] uobj_destroy+0x57/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs] ib_uverbs_ioctl+0x129/0x230 [ib_uverbs] __x64_sys_ioctl+0x596/0xaa0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}: __lock_acquire+0x1826/0x2f00 lock_acquire+0xd3/0x2e0 __mutex_lock+0x98/0xf10 mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x18e/0x1f0 unmap_vmas+0x182/0x1a0 exit_mmap+0xf3/0x4a0 mmput+0x3a/0x100 do_exit+0x2b9/0xa90 do_group_exit+0x32/0xa0 get_signal+0xc32/0xcb0 arch_do_signal_or_restart+0x29/0x1d0 syscall_exit_to_user_mode+0x105/0x1d0 do_syscall_64+0x79/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Chain exists of: &dev->cache.rb_lock --> mmu_notifier_invalidate_range_start --> &umem_odp->umem_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&umem_odp->umem_mutex); lock(mmu_notifier_invalidate_range_start); lock(&umem_odp->umem_mutex); lock(&dev->cache.rb_lock); *** DEADLOCK *** Fixes: abb604a ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error") Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Jul 24, 2025
commit 3b602dd upstream. When operating in concurrent STA/AP mode with host MLME enabled, the firmware incorrectly sends disassociation frames to the STA interface when clients disconnect from the AP interface. This causes kernel warnings as the STA interface processes disconnect events that don't apply to it: [ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us [ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT [ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] [ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211] [ 1303.370221] sp : ffff800083053be0 [ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000 [ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae [ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008 [ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006 [ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048 [ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000 [ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300 [ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002 [ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186 [ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de [ 1303.446221] Call trace: [ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P) [ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211] [ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex] [ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex] [ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex] [ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex] [ 1303.483734] process_one_work+0x14c/0x28c [ 1303.487845] worker_thread+0x2cc/0x3d4 [ 1303.491680] kthread+0x12c/0x208 [ 1303.495014] ret_from_fork+0x10/0x20 Add validation in the STA receive path to verify that disassoc/deauth frames originate from the connected AP. Frames that fail this check are discarded early, preventing them from reaching the MLME layer and triggering WARN_ON(). This filtering logic is similar with that used in the ieee80211_rx_mgmt_disassoc() function in mac80211, which drops disassoc frames that don't match the current BSSID (!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring only relevant frames are processed. Tested on: - 8997 with FW 16.68.1.p197 Fixes: 3699589 ("wifi: mwifiex: add host mlme for client mode") Cc: stable@vger.kernel.org Signed-off-by: Vitor Soares <vitor.soares@toradex.com> Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20250701142643.658990-1-ivitro@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Jul 24, 2025
commit 99af22c upstream. alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even when the alloc_tag_cttype is not allocated because: 1) alloc tagging is disabled because mem profiling is disabled (!alloc_tag_cttype) 2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype) 3) alloc tagging is enabled, but failed initialization (!alloc_tag_cttype or IS_ERR(alloc_tag_cttype)) In all cases, alloc_tag_cttype is not allocated, and therefore alloc_tag_top_users() should not attempt to acquire the semaphore. This leads to a crash on memory allocation failure by attempting to acquire a non-existent semaphore: Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df] CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G D 6.16.0-rc2 #1 VOLUNTARY Tainted: [D]=DIE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:down_read_trylock+0xaa/0x3b0 Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000 RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070 RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1 R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37 R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000 FS: 00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0 Call Trace: <TASK> codetag_trylock_module_list+0xd/0x20 alloc_tag_top_users+0x369/0x4b0 __show_mem+0x1cd/0x6e0 warn_alloc+0x2b1/0x390 __alloc_frozen_pages_noprof+0x12b9/0x21a0 alloc_pages_mpol+0x135/0x3e0 alloc_slab_page+0x82/0xe0 new_slab+0x212/0x240 ___slab_alloc+0x82a/0xe00 </TASK> As David Wang points out, this issue became easier to trigger after commit 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init"). Before the commit, the issue occurred only when it failed to allocate and initialize alloc_tag_cttype or if a memory allocation fails before alloc_tag_init() is called. After the commit, it can be easily triggered when memory profiling is compiled but disabled at boot. To properly determine whether alloc_tag_init() has been called and its data structures initialized, verify that alloc_tag_cttype is a valid pointer before acquiring the semaphore. If the variable is NULL or an error value, it has not been properly initialized. In such a case, just skip and do not attempt to acquire the semaphore. [harry.yoo@oracle.com: v3] Link: https://lkml.kernel.org/r/20250624072513.84219-1-harry.yoo@oracle.com Link: https://lkml.kernel.org/r/20250620195305.1115151-1-harry.yoo@oracle.com Fixes: 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init") Fixes: 1438d34 ("lib: add memory allocations report in show_mem()") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202506181351.bba867dd-lkp@intel.com Acked-by: Suren Baghdasaryan <surenb@google.com> Tested-by: Raghavendra K T <raghavendra.kt@amd.com> Cc: Casey Chen <cachen@purestorage.com> Cc: David Wang <00107082@163.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Yuanyuan Zhong <yzhong@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Jul 28, 2025
commit b1bf1a7 upstream. If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP is enabled for dm-bufio. However, when bufio tries to evict buffers, there is a chance to trigger scheduling in spin_lock_bh, the following warning is hit: BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2 preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 4 locks held by kworker/2:2/123: #0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970 #1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970 #2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710 #3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 #305 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: dm_bufio_cache do_global_cleanup Call Trace: <TASK> dump_stack_lvl+0x53/0x70 __might_resched+0x360/0x4e0 do_global_cleanup+0x2f5/0x710 process_one_work+0x7db/0x1970 worker_thread+0x518/0xea0 kthread+0x359/0x690 ret_from_fork+0xf3/0x1b0 ret_from_fork_asm+0x1a/0x30 </TASK> That can be reproduced by: veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb SIZE=$(blockdev --getsz /dev/vda) dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet" mount /dev/dm-0 /mnt -o ro echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes [read files in /mnt] Cc: stable@vger.kernel.org # v6.4+ Fixes: 450e8de ("dm bufio: improve concurrent IO performance") Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com> Signed-off-by: Sheng Yong <shengyong1@xiaomi.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Jul 28, 2025
[ Upstream commit cf02334 ] If the PHY driver uses another PHY internally (e.g. in case of eUSB2, repeaters are represented as PHYs), then it would trigger the following lockdep splat because all PHYs use a single static lockdep key and thus lockdep can not identify whether there is a dependency or not and reports a false positive. Make PHY subsystem use dynamic lockdep keys, assigning each driver a separate key. This way lockdep can correctly identify dependency graph between mutexes. ============================================ WARNING: possible recursive locking detected 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted -------------------------------------------- kworker/u51:0/78 is trying to acquire lock: ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c but task is already holding lock: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&phy->mutex); lock(&phy->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u51:0/78: #0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec #1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec #2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188 #3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c stack backtrace: CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024 Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 print_deadlock_bug+0x258/0x348 __lock_acquire+0x10fc/0x1f84 lock_acquire+0x1c8/0x338 __mutex_lock+0xb8/0x59c mutex_lock_nested+0x24/0x30 phy_init+0x4c/0x12c snps_eusb2_hsphy_init+0x54/0x1a0 phy_init+0xe0/0x12c dwc3_core_init+0x450/0x10b4 dwc3_core_probe+0xce4/0x15fc dwc3_probe+0x64/0xb0 platform_probe+0x68/0xc4 really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x208/0x5ec worker_thread+0x1c0/0x368 kthread+0x14c/0x20c ret_from_fork+0x10/0x20 Fixes: 3584f63 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater") Fixes: e246355 ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reported-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/lkml/ZnpoAVGJMG4Zu-Jw@hovoldconsulting.com/ Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250605-phy-subinit-v3-1-1e1e849e10cd@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Jul 29, 2025
[ Upstream commit eedf3e3 ] ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c #1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c #1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c #2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f #3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 #4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 #6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 #7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a #8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 #9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 #10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f #11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf #12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 #13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 #14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d #15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e #16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad #17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e #18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 #19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 #20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 #21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 #22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 #23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 #24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 #25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc #26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 #27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 #28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 #29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d #30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 #31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 #32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 #33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d #34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 #35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e #36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 #37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 #38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 #39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 #40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 #41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: open-acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4664267.LvFx2qVVIh@rjwysocki.net Signed-off-by: Tamir Duberstein <tamird@gmail.com> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Jul 29, 2025
[ Upstream commit 2ed25aa ] The issue arises when kzalloc() is invoked while holding umem_mutex or any other lock acquired under umem_mutex. This is problematic because kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke mmu_notifier_invalidate_range_start(). This function can lead to mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again, resulting in a deadlock. The problematic flow: CPU0 | CPU1 ---------------------------------------|------------------------------------------------ mlx5_ib_dereg_mr() | → revoke_mr() | → mutex_lock(&umem_odp->umem_mutex) | | mlx5_mkey_cache_init() | → mutex_lock(&dev->cache.rb_lock) | → mlx5r_cache_create_ent_locked() | → kzalloc(GFP_KERNEL) | → fs_reclaim() | → mmu_notifier_invalidate_range_start() | → mlx5_ib_invalidate_range() | → mutex_lock(&umem_odp->umem_mutex) → cache_ent_find_and_store() | → mutex_lock(&dev->cache.rb_lock) | Additionally, when kzalloc() is called from within cache_ent_find_and_store(), we encounter the same deadlock due to re-acquisition of umem_mutex. Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr() and before acquiring rb_lock. This ensures that we don't hold umem_mutex while performing memory allocations that could trigger the reclaim path. This change prevents the deadlock by ensuring proper lock ordering and avoiding holding locks during memory allocation operations that could trigger the reclaim path. The following lockdep warning demonstrates the deadlock: python3/20557 is trying to acquire lock: ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at: mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] but task is already holding lock: ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x7b/0x1a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x60/0xd0 mem_cgroup_css_alloc+0x6f/0x9b0 cgroup_init_subsys+0xa4/0x240 cgroup_init+0x1c8/0x510 start_kernel+0x747/0x760 x86_64_start_reservations+0x25/0x30 x86_64_start_kernel+0x73/0x80 common_startup_64+0x129/0x138 -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x91/0xd0 __kmalloc_cache_noprof+0x4d/0x4c0 mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib] mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib] mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib] __mlx5_ib_add+0x4b/0x190 [mlx5_ib] mlx5r_probe+0xd9/0x320 [mlx5_ib] auxiliary_bus_probe+0x42/0x70 really_probe+0xdb/0x360 __driver_probe_device+0x8f/0x130 driver_probe_device+0x1f/0xb0 __driver_attach+0xd4/0x1f0 bus_for_each_dev+0x79/0xd0 bus_add_driver+0xf0/0x200 driver_register+0x6e/0xc0 __auxiliary_driver_register+0x6a/0xc0 do_one_initcall+0x5e/0x390 do_init_module+0x88/0x240 init_module_from_file+0x85/0xc0 idempotent_init_module+0x104/0x300 __x64_sys_finit_module+0x68/0xc0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}: __mutex_lock+0x98/0xf10 __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib] mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib] ib_dereg_mr_user+0x85/0x1f0 [ib_core] uverbs_free_mr+0x19/0x30 [ib_uverbs] destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs] uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs] uobj_destroy+0x57/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs] ib_uverbs_ioctl+0x129/0x230 [ib_uverbs] __x64_sys_ioctl+0x596/0xaa0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}: __lock_acquire+0x1826/0x2f00 lock_acquire+0xd3/0x2e0 __mutex_lock+0x98/0xf10 mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x18e/0x1f0 unmap_vmas+0x182/0x1a0 exit_mmap+0xf3/0x4a0 mmput+0x3a/0x100 do_exit+0x2b9/0xa90 do_group_exit+0x32/0xa0 get_signal+0xc32/0xcb0 arch_do_signal_or_restart+0x29/0x1d0 syscall_exit_to_user_mode+0x105/0x1d0 do_syscall_64+0x79/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Chain exists of: &dev->cache.rb_lock --> mmu_notifier_invalidate_range_start --> &umem_odp->umem_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&umem_odp->umem_mutex); lock(mmu_notifier_invalidate_range_start); lock(&umem_odp->umem_mutex); lock(&dev->cache.rb_lock); *** DEADLOCK *** Fixes: abb604a ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error") Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Jul 29, 2025
commit 3b602dd upstream. When operating in concurrent STA/AP mode with host MLME enabled, the firmware incorrectly sends disassociation frames to the STA interface when clients disconnect from the AP interface. This causes kernel warnings as the STA interface processes disconnect events that don't apply to it: [ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us [ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT [ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] [ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211] [ 1303.370221] sp : ffff800083053be0 [ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000 [ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae [ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008 [ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006 [ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048 [ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000 [ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300 [ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002 [ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186 [ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de [ 1303.446221] Call trace: [ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P) [ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211] [ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex] [ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex] [ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex] [ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex] [ 1303.483734] process_one_work+0x14c/0x28c [ 1303.487845] worker_thread+0x2cc/0x3d4 [ 1303.491680] kthread+0x12c/0x208 [ 1303.495014] ret_from_fork+0x10/0x20 Add validation in the STA receive path to verify that disassoc/deauth frames originate from the connected AP. Frames that fail this check are discarded early, preventing them from reaching the MLME layer and triggering WARN_ON(). This filtering logic is similar with that used in the ieee80211_rx_mgmt_disassoc() function in mac80211, which drops disassoc frames that don't match the current BSSID (!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring only relevant frames are processed. Tested on: - 8997 with FW 16.68.1.p197 Fixes: 3699589 ("wifi: mwifiex: add host mlme for client mode") Cc: stable@vger.kernel.org Signed-off-by: Vitor Soares <vitor.soares@toradex.com> Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20250701142643.658990-1-ivitro@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Jul 29, 2025
commit 99af22c upstream. alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even when the alloc_tag_cttype is not allocated because: 1) alloc tagging is disabled because mem profiling is disabled (!alloc_tag_cttype) 2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype) 3) alloc tagging is enabled, but failed initialization (!alloc_tag_cttype or IS_ERR(alloc_tag_cttype)) In all cases, alloc_tag_cttype is not allocated, and therefore alloc_tag_top_users() should not attempt to acquire the semaphore. This leads to a crash on memory allocation failure by attempting to acquire a non-existent semaphore: Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df] CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G D 6.16.0-rc2 #1 VOLUNTARY Tainted: [D]=DIE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:down_read_trylock+0xaa/0x3b0 Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000 RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070 RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1 R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37 R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000 FS: 00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0 Call Trace: <TASK> codetag_trylock_module_list+0xd/0x20 alloc_tag_top_users+0x369/0x4b0 __show_mem+0x1cd/0x6e0 warn_alloc+0x2b1/0x390 __alloc_frozen_pages_noprof+0x12b9/0x21a0 alloc_pages_mpol+0x135/0x3e0 alloc_slab_page+0x82/0xe0 new_slab+0x212/0x240 ___slab_alloc+0x82a/0xe00 </TASK> As David Wang points out, this issue became easier to trigger after commit 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init"). Before the commit, the issue occurred only when it failed to allocate and initialize alloc_tag_cttype or if a memory allocation fails before alloc_tag_init() is called. After the commit, it can be easily triggered when memory profiling is compiled but disabled at boot. To properly determine whether alloc_tag_init() has been called and its data structures initialized, verify that alloc_tag_cttype is a valid pointer before acquiring the semaphore. If the variable is NULL or an error value, it has not been properly initialized. In such a case, just skip and do not attempt to acquire the semaphore. [harry.yoo@oracle.com: v3] Link: https://lkml.kernel.org/r/20250624072513.84219-1-harry.yoo@oracle.com Link: https://lkml.kernel.org/r/20250620195305.1115151-1-harry.yoo@oracle.com Fixes: 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init") Fixes: 1438d34 ("lib: add memory allocations report in show_mem()") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202506181351.bba867dd-lkp@intel.com Acked-by: Suren Baghdasaryan <surenb@google.com> Tested-by: Raghavendra K T <raghavendra.kt@amd.com> Cc: Casey Chen <cachen@purestorage.com> Cc: David Wang <00107082@163.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Yuanyuan Zhong <yzhong@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Jul 29, 2025
commit b1bf1a7 upstream. If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP is enabled for dm-bufio. However, when bufio tries to evict buffers, there is a chance to trigger scheduling in spin_lock_bh, the following warning is hit: BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2 preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 4 locks held by kworker/2:2/123: #0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970 #1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970 #2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710 #3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 #305 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: dm_bufio_cache do_global_cleanup Call Trace: <TASK> dump_stack_lvl+0x53/0x70 __might_resched+0x360/0x4e0 do_global_cleanup+0x2f5/0x710 process_one_work+0x7db/0x1970 worker_thread+0x518/0xea0 kthread+0x359/0x690 ret_from_fork+0xf3/0x1b0 ret_from_fork_asm+0x1a/0x30 </TASK> That can be reproduced by: veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb SIZE=$(blockdev --getsz /dev/vda) dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet" mount /dev/dm-0 /mnt -o ro echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes [read files in /mnt] Cc: stable@vger.kernel.org # v6.4+ Fixes: 450e8de ("dm bufio: improve concurrent IO performance") Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com> Signed-off-by: Sheng Yong <shengyong1@xiaomi.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Jul 29, 2025
[ Upstream commit cf02334 ] If the PHY driver uses another PHY internally (e.g. in case of eUSB2, repeaters are represented as PHYs), then it would trigger the following lockdep splat because all PHYs use a single static lockdep key and thus lockdep can not identify whether there is a dependency or not and reports a false positive. Make PHY subsystem use dynamic lockdep keys, assigning each driver a separate key. This way lockdep can correctly identify dependency graph between mutexes. ============================================ WARNING: possible recursive locking detected 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted -------------------------------------------- kworker/u51:0/78 is trying to acquire lock: ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c but task is already holding lock: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&phy->mutex); lock(&phy->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u51:0/78: #0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec #1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec #2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188 #3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c stack backtrace: CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024 Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 print_deadlock_bug+0x258/0x348 __lock_acquire+0x10fc/0x1f84 lock_acquire+0x1c8/0x338 __mutex_lock+0xb8/0x59c mutex_lock_nested+0x24/0x30 phy_init+0x4c/0x12c snps_eusb2_hsphy_init+0x54/0x1a0 phy_init+0xe0/0x12c dwc3_core_init+0x450/0x10b4 dwc3_core_probe+0xce4/0x15fc dwc3_probe+0x64/0xb0 platform_probe+0x68/0xc4 really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x208/0x5ec worker_thread+0x1c0/0x368 kthread+0x14c/0x20c ret_from_fork+0x10/0x20 Fixes: 3584f63 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater") Fixes: e246355 ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reported-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/lkml/ZnpoAVGJMG4Zu-Jw@hovoldconsulting.com/ Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250605-phy-subinit-v3-1-1e1e849e10cd@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Aug 7, 2025
[ Upstream commit 6c4a92d ] The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe, releases the aarp_lock, sleeps, then re-acquires the lock. During that window an expire timer thread (__aarp_expire_timer) can remove and kfree() the same entry, leading to a use-after-free. race condition: cpu 0 | cpu 1 atalk_sendmsg() | atif_proxy_probe_device() aarp_send_ddp() | aarp_proxy_probe_network() mod_timer() | lock(aarp_lock) // LOCK!! timeout around 200ms | alloc(aarp_entry) and then call | proxies[hash] = aarp_entry aarp_expire_timeout() | aarp_send_probe() | unlock(aarp_lock) // UNLOCK!! lock(aarp_lock) // LOCK!! | msleep(100); __aarp_expire_timer(&proxies[ct]) | free(aarp_entry) | unlock(aarp_lock) // UNLOCK!! | | lock(aarp_lock) // LOCK!! | UAF aarp_entry !! ================================================================== BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 Read of size 4 at addr ffff8880123aa360 by task repro/13278 CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full) Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc1/0x630 mm/kasan/report.c:521 kasan_report+0xca/0x100 mm/kasan/report.c:634 aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 sock_do_ioctl+0xdc/0x260 net/socket.c:1190 sock_ioctl+0x239/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated: aarp_alloc net/appletalk/aarp.c:382 [inline] aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 Freed: kfree+0x148/0x4d0 mm/slub.c:4841 __aarp_expire net/appletalk/aarp.c:90 [inline] __aarp_expire_timer net/appletalk/aarp.c:261 [inline] aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317 The buggy address belongs to the object at ffff8880123aa300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 96 bytes inside of freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0) Memory state around the buggy address: ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com> Link: https://patch.msgid.link/20250717012843.880423-1-hxzene@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Sep 5, 2025
[ Upstream commit d3ed6d6 ] The generic/001 test of xfstests suite fails and corrupts the HFS volume: sudo ./check generic/001 FSTYP -- hfs PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc2+ #3 SMP PREEMPT_DYNAMIC Fri Apr 25 17:13:00 PDT 2> MKFS_OPTIONS -- /dev/loop51 MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch generic/001 32s ... _check_generic_filesystem: filesystem on /dev/loop50 is inconsistent (see /home/slavad/XFSTESTS-2/xfstests-dev/results//generic/001.full for details) Ran: generic/001 Failures: generic/001 Failed 1 of 1 tests fsck.hfs -d -n ./test-image.bin ** ./test-image.bin (NO WRITE) Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K. Executing fsck_hfs (version 540.1-Linux). ** Checking HFS volume. The volume name is untitled ** Checking extents overflow file. ** Checking catalog file. Unused node is not erased (node = 2) Unused node is not erased (node = 4) <skipped> Unused node is not erased (node = 253) Unused node is not erased (node = 254) Unused node is not erased (node = 255) Unused node is not erased (node = 256) ** Checking catalog hierarchy. ** Checking volume bitmap. ** Checking volume information. Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0000 CBTStat = 0x0004 CatStat = 0x00000000 ** The volume untitled was found corrupt and needs to be repaired. volume type is HFS primary MDB is at block 2 0x02 alternate MDB is at block 20971518 0x13ffffe primary VHB is at block 0 0x00 alternate VHB is at block 0 0x00 sector size = 512 0x200 VolumeObject flags = 0x19 total sectors for volume = 20971520 0x1400000 total sectors for embedded volume = 0 0x00 This patch adds logic of clearing the deleted b-tree node. sudo ./check generic/001 FSTYP -- hfs PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc2+ #3 SMP PREEMPT_DYNAMIC Fri Apr 25 17:13:00 PDT 2025 MKFS_OPTIONS -- /dev/loop51 MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch generic/001 9s ... 32s Ran: generic/001 Passed all 1 tests fsck.hfs -d -n ./test-image.bin ** ./test-image.bin (NO WRITE) Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K. Executing fsck_hfs (version 540.1-Linux). ** Checking HFS volume. The volume name is untitled ** Checking extents overflow file. ** Checking catalog file. ** Checking catalog hierarchy. ** Checking volume bitmap. ** Checking volume information. ** The volume untitled appears to be OK. Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250430001211.1912533-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Sep 5, 2025
commit 33caa20 upstream. The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it. Cc: stable@vger.kernel.org Fixes: 4c26280 ("hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/1754511711-11188-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Oct 31, 2025
[ Upstream commit 6c4a92d ] The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe, releases the aarp_lock, sleeps, then re-acquires the lock. During that window an expire timer thread (__aarp_expire_timer) can remove and kfree() the same entry, leading to a use-after-free. race condition: cpu 0 | cpu 1 atalk_sendmsg() | atif_proxy_probe_device() aarp_send_ddp() | aarp_proxy_probe_network() mod_timer() | lock(aarp_lock) // LOCK!! timeout around 200ms | alloc(aarp_entry) and then call | proxies[hash] = aarp_entry aarp_expire_timeout() | aarp_send_probe() | unlock(aarp_lock) // UNLOCK!! lock(aarp_lock) // LOCK!! | msleep(100); __aarp_expire_timer(&proxies[ct]) | free(aarp_entry) | unlock(aarp_lock) // UNLOCK!! | | lock(aarp_lock) // LOCK!! | UAF aarp_entry !! ================================================================== BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 Read of size 4 at addr ffff8880123aa360 by task repro/13278 CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full) Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc1/0x630 mm/kasan/report.c:521 kasan_report+0xca/0x100 mm/kasan/report.c:634 aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 sock_do_ioctl+0xdc/0x260 net/socket.c:1190 sock_ioctl+0x239/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated: aarp_alloc net/appletalk/aarp.c:382 [inline] aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 Freed: kfree+0x148/0x4d0 mm/slub.c:4841 __aarp_expire net/appletalk/aarp.c:90 [inline] __aarp_expire_timer net/appletalk/aarp.c:261 [inline] aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317 The buggy address belongs to the object at ffff8880123aa300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 96 bytes inside of freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0) Memory state around the buggy address: ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com> Link: https://patch.msgid.link/20250717012843.880423-1-hxzene@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Oct 31, 2025
[ Upstream commit d3ed6d6 ] The generic/001 test of xfstests suite fails and corrupts the HFS volume: sudo ./check generic/001 FSTYP -- hfs PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc2+ #3 SMP PREEMPT_DYNAMIC Fri Apr 25 17:13:00 PDT 2> MKFS_OPTIONS -- /dev/loop51 MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch generic/001 32s ... _check_generic_filesystem: filesystem on /dev/loop50 is inconsistent (see /home/slavad/XFSTESTS-2/xfstests-dev/results//generic/001.full for details) Ran: generic/001 Failures: generic/001 Failed 1 of 1 tests fsck.hfs -d -n ./test-image.bin ** ./test-image.bin (NO WRITE) Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K. Executing fsck_hfs (version 540.1-Linux). ** Checking HFS volume. The volume name is untitled ** Checking extents overflow file. ** Checking catalog file. Unused node is not erased (node = 2) Unused node is not erased (node = 4) <skipped> Unused node is not erased (node = 253) Unused node is not erased (node = 254) Unused node is not erased (node = 255) Unused node is not erased (node = 256) ** Checking catalog hierarchy. ** Checking volume bitmap. ** Checking volume information. Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0000 CBTStat = 0x0004 CatStat = 0x00000000 ** The volume untitled was found corrupt and needs to be repaired. volume type is HFS primary MDB is at block 2 0x02 alternate MDB is at block 20971518 0x13ffffe primary VHB is at block 0 0x00 alternate VHB is at block 0 0x00 sector size = 512 0x200 VolumeObject flags = 0x19 total sectors for volume = 20971520 0x1400000 total sectors for embedded volume = 0 0x00 This patch adds logic of clearing the deleted b-tree node. sudo ./check generic/001 FSTYP -- hfs PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc2+ #3 SMP PREEMPT_DYNAMIC Fri Apr 25 17:13:00 PDT 2025 MKFS_OPTIONS -- /dev/loop51 MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch generic/001 9s ... 32s Ran: generic/001 Passed all 1 tests fsck.hfs -d -n ./test-image.bin ** ./test-image.bin (NO WRITE) Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K. Executing fsck_hfs (version 540.1-Linux). ** Checking HFS volume. The volume name is untitled ** Checking extents overflow file. ** Checking catalog file. ** Checking catalog hierarchy. ** Checking volume bitmap. ** Checking volume information. ** The volume untitled appears to be OK. Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250430001211.1912533-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Oct 31, 2025
commit 33caa20 upstream. The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it. Cc: stable@vger.kernel.org Fixes: 4c26280 ("hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/1754511711-11188-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Apr 14, 2026
[ Upstream commit 5cb81eeda909dbb2def209dd10636b51549a3f8a ] ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the conntrack reference immediately after netlink_dump_start(). When the dump spans multiple rounds, the second recvmsg() triggers the dump callback which dereferences the now-freed conntrack via nfct_help(ct), leading to a use-after-free on ct->ext. The bug is that the netlink_dump_control has no .start or .done callbacks to manage the conntrack reference across dump rounds. Other dump functions in the same file (e.g. ctnetlink_get_conntrack) properly use .start/.done callbacks for this purpose. Fix this by adding .start and .done callbacks that hold and release the conntrack reference for the duration of the dump, and move the nfct_help() call after the cb->args[0] early-return check in the dump callback to avoid dereferencing ct->ext unnecessarily. BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0 Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133 CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY Call Trace: <TASK> ctnetlink_exp_ct_dump_table+0x4f/0x2e0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 ? aa_sk_perm+0x184/0x450 sock_recvmsg+0xde/0xf0 Allocated by task 133: kmem_cache_alloc_noprof+0x134/0x440 __nf_conntrack_alloc+0xa8/0x2b0 ctnetlink_create_conntrack+0xa1/0x900 ctnetlink_new_conntrack+0x3cf/0x7d0 nfnetlink_rcv_msg+0x48e/0x510 netlink_rcv_skb+0xc9/0x1f0 nfnetlink_rcv+0xdb/0x220 netlink_unicast+0x3ec/0x590 netlink_sendmsg+0x397/0x690 __sys_sendmsg+0xf4/0x180 Freed by task 0: slab_free_after_rcu_debug+0xad/0x1e0 rcu_core+0x5c3/0x9c0 Fixes: e844a92 ("netfilter: ctnetlink: allow to dump expectation per master conntrack") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Apr 14, 2026
commit 317e49358ebbf6390fa439ef3c142f9239dd25fb upstream.
The devm_free_irq() and devm_request_irq() functions should not be
executed in an atomic context.
During device suspend, all userspace processes and most kernel threads
are frozen. Additionally, we flush all tx/rx status, disable all macb
interrupts, and halt rx operations. Therefore, it is safe to split the
region protected by bp->lock into two independent sections, allowing
devm_free_irq() and devm_request_irq() to run in a non-atomic context.
This modification resolves the following lockdep warning:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 501, name: rtcwake
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 0
7 locks held by rtcwake/501:
#0: ffff0008038c3408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368
#1: ffff0008049a5e88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8
#2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8
#3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290
#4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0
#5: ffff800081d00458 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x48
#6: ffff0008031fb9e0 (&bp->lock){-.-.}-{3:3}, at: macb_suspend+0x144/0x558
irq event stamp: 8682
hardirqs last enabled at (8681): [<ffff8000813c7d7c>] _raw_spin_unlock_irqrestore+0x44/0x88
hardirqs last disabled at (8682): [<ffff8000813c7b58>] _raw_spin_lock_irqsave+0x38/0x98
softirqs last enabled at (7322): [<ffff8000800f1b4c>] handle_softirqs+0x52c/0x588
softirqs last disabled at (7317): [<ffff800080010310>] __do_softirq+0x20/0x2c
CPU: 1 UID: 0 PID: 501 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #125 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
Call trace:
show_stack+0x24/0x38 (C)
__dump_stack+0x28/0x38
dump_stack_lvl+0x64/0x88
dump_stack+0x18/0x24
__might_resched+0x200/0x218
__might_sleep+0x38/0x98
__mutex_lock_common+0x7c/0x1378
mutex_lock_nested+0x38/0x50
free_irq+0x68/0x2b0
devm_irq_release+0x24/0x38
devres_release+0x40/0x80
devm_free_irq+0x48/0x88
macb_suspend+0x298/0x558
device_suspend+0x218/0x4f0
dpm_suspend+0x244/0x3a0
dpm_suspend_start+0x50/0x78
suspend_devices_and_enter+0xec/0x560
pm_suspend+0x194/0x290
state_store+0x110/0x158
kobj_attr_store+0x1c/0x30
sysfs_kf_write+0xa8/0xd0
kernfs_fop_write_iter+0x11c/0x1c8
vfs_write+0x248/0x368
ksys_write+0x7c/0xf8
__arm64_sys_write+0x28/0x40
invoke_syscall+0x4c/0xe8
el0_svc_common+0x98/0xf0
do_el0_svc+0x28/0x40
el0_svc+0x54/0x1e0
el0t_64_sync_handler+0x84/0x130
el0t_64_sync+0x198/0x1a0
Fixes: 558e35c ("net: macb: WoL support for GEM type of Ethernet controller")
Cc: stable@vger.kernel.org
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260318-macb-irq-v2-1-f1179768ab24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Apr 14, 2026
commit baa35a698cea26930679a20a7550bbb4c8319725 upstream. Access to net_device::ip_ptr and its associated members must be protected by an RCU lock. Since we are modifying this piece of code, let's also move it to execute only when WAKE_ARP is enabled. To minimize the duration of the RCU lock, a local variable is used to temporarily store the IP address. This change resolves the following RCU check warning: WARNING: suspicious RCU usage 7.0.0-rc3-next-20260310-yocto-standard+ #122 Not tainted ----------------------------- drivers/net/ethernet/cadence/macb_main.c:5944 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/518: #0: ffff000803ab1408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368 #1: ffff0008090bf088 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8 #2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8 #3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290 #4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0 stack backtrace: CPU: 3 UID: 0 PID: 518 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #122 PREEMPT Hardware name: ZynqMP ZCU102 Rev1.1 (DT) Call trace: show_stack+0x24/0x38 (C) __dump_stack+0x28/0x38 dump_stack_lvl+0x64/0x88 dump_stack+0x18/0x24 lockdep_rcu_suspicious+0x134/0x1d8 macb_suspend+0xd8/0x4c0 device_suspend+0x218/0x4f0 dpm_suspend+0x244/0x3a0 dpm_suspend_start+0x50/0x78 suspend_devices_and_enter+0xec/0x560 pm_suspend+0x194/0x290 state_store+0x110/0x158 kobj_attr_store+0x1c/0x30 sysfs_kf_write+0xa8/0xd0 kernfs_fop_write_iter+0x11c/0x1c8 vfs_write+0x248/0x368 ksys_write+0x7c/0xf8 __arm64_sys_write+0x28/0x40 invoke_syscall+0x4c/0xe8 el0_svc_common+0x98/0xf0 do_el0_svc+0x28/0x40 el0_svc+0x54/0x1e0 el0t_64_sync_handler+0x84/0x130 el0t_64_sync+0x198/0x1a0 Fixes: 0cb8de3 ("net: macb: Add ARP support to WOL") Signed-off-by: Kevin Hao <haokexin@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://patch.msgid.link/20260318-macb-irq-v2-2-f1179768ab24@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
taraant
pushed a commit
that referenced
this pull request
Apr 14, 2026
[ Upstream commit 77603ab10429fe713a03345553ca8dbbfb1d91c6 ] Shin'ichiro reported sporadic hangs when running generic/013 in our CI system. When enabling lockdep, there is a lockdep splat when calling btrfs_get_dev_zone_info_all_devices() in the mount path that can be triggered by i.e. generic/013: ====================================================== WARNING: possible circular locking dependency detected 7.0.0-rc1+ #355 Not tainted ------------------------------------------------------ mount/1043 is trying to acquire lock: ffff8881020b5470 (&vblk->vdev_mutex){+.+.}-{4:4}, at: virtblk_report_zones+0xda/0x430 but task is already holding lock: ffff888102a738e0 (&fs_devs->device_list_mutex){+.+.}-{4:4}, at: btrfs_get_dev_zone_info_all_devices+0x45/0x90 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&fs_devs->device_list_mutex){+.+.}-{4:4}: __mutex_lock+0xa3/0x1360 btrfs_create_pending_block_groups+0x1f4/0x9d0 __btrfs_end_transaction+0x3e/0x2e0 btrfs_zoned_reserve_data_reloc_bg+0x2f8/0x390 open_ctree+0x1934/0x23db btrfs_get_tree.cold+0x105/0x26c vfs_get_tree+0x28/0xb0 __do_sys_fsconfig+0x324/0x680 do_syscall_64+0x92/0x4f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #3 (btrfs_trans_num_extwriters){++++}-{0:0}: join_transaction+0xc2/0x5c0 start_transaction+0x17c/0xbc0 btrfs_zoned_reserve_data_reloc_bg+0x2b4/0x390 open_ctree+0x1934/0x23db btrfs_get_tree.cold+0x105/0x26c vfs_get_tree+0x28/0xb0 __do_sys_fsconfig+0x324/0x680 do_syscall_64+0x92/0x4f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (btrfs_trans_num_writers){++++}-{0:0}: lock_release+0x163/0x4b0 __btrfs_end_transaction+0x1c7/0x2e0 btrfs_dirty_inode+0x6f/0xd0 touch_atime+0xe5/0x2c0 btrfs_file_mmap_prepare+0x65/0x90 __mmap_region+0x4b9/0xf00 mmap_region+0xf7/0x120 do_mmap+0x43d/0x610 vm_mmap_pgoff+0xd6/0x190 ksys_mmap_pgoff+0x7e/0xc0 do_syscall_64+0x92/0x4f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&mm->mmap_lock){++++}-{4:4}: __might_fault+0x68/0xa0 _copy_to_user+0x22/0x70 blkdev_copy_zone_to_user+0x22/0x40 virtblk_report_zones+0x282/0x430 blkdev_report_zones_ioctl+0xfd/0x130 blkdev_ioctl+0x20f/0x2c0 __x64_sys_ioctl+0x86/0xd0 do_syscall_64+0x92/0x4f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&vblk->vdev_mutex){+.+.}-{4:4}: __lock_acquire+0x1522/0x2680 lock_acquire+0xd5/0x2f0 __mutex_lock+0xa3/0x1360 virtblk_report_zones+0xda/0x430 blkdev_report_zones_cached+0x162/0x190 btrfs_get_dev_zones+0xdc/0x2e0 btrfs_get_dev_zone_info+0x219/0xe80 btrfs_get_dev_zone_info_all_devices+0x62/0x90 open_ctree+0x1200/0x23db btrfs_get_tree.cold+0x105/0x26c vfs_get_tree+0x28/0xb0 __do_sys_fsconfig+0x324/0x680 do_syscall_64+0x92/0x4f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &vblk->vdev_mutex --> btrfs_trans_num_extwriters --> &fs_devs->device_list_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_devs->device_list_mutex); lock(btrfs_trans_num_extwriters); lock(&fs_devs->device_list_mutex); lock(&vblk->vdev_mutex); *** DEADLOCK *** 3 locks held by mount/1043: #0: ffff88811063e878 (&fc->uapi_mutex){+.+.}-{4:4}, at: __do_sys_fsconfig+0x2ae/0x680 #1: ffff88810cb9f0e8 (&type->s_umount_key#31/1){+.+.}-{4:4}, at: alloc_super+0xc0/0x3e0 #2: ffff888102a738e0 (&fs_devs->device_list_mutex){+.+.}-{4:4}, at: btrfs_get_dev_zone_info_all_devices+0x45/0x90 stack backtrace: CPU: 2 UID: 0 PID: 1043 Comm: mount Not tainted 7.0.0-rc1+ #355 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-9.fc43 06/10/2025 Call Trace: <TASK> dump_stack_lvl+0x5b/0x80 print_circular_bug.cold+0x18d/0x1d8 check_noncircular+0x10d/0x130 __lock_acquire+0x1522/0x2680 ? vmap_small_pages_range_noflush+0x3ef/0x820 lock_acquire+0xd5/0x2f0 ? virtblk_report_zones+0xda/0x430 ? lock_is_held_type+0xcd/0x130 __mutex_lock+0xa3/0x1360 ? virtblk_report_zones+0xda/0x430 ? virtblk_report_zones+0xda/0x430 ? __pfx_copy_zone_info_cb+0x10/0x10 ? virtblk_report_zones+0xda/0x430 virtblk_report_zones+0xda/0x430 ? __pfx_copy_zone_info_cb+0x10/0x10 blkdev_report_zones_cached+0x162/0x190 ? __pfx_copy_zone_info_cb+0x10/0x10 btrfs_get_dev_zones+0xdc/0x2e0 btrfs_get_dev_zone_info+0x219/0xe80 btrfs_get_dev_zone_info_all_devices+0x62/0x90 open_ctree+0x1200/0x23db btrfs_get_tree.cold+0x105/0x26c ? rcu_is_watching+0x18/0x50 vfs_get_tree+0x28/0xb0 __do_sys_fsconfig+0x324/0x680 do_syscall_64+0x92/0x4f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f615e27a40e RSP: 002b:00007fff11b18fb8 EFLAGS: 00000246 ORIG_RAX: 00000000000001af RAX: ffffffffffffffda RBX: 000055572e92ab10 RCX: 00007f615e27a40e RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003 RBP: 00007fff11b19100 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000055572e92bc40 R14: 00007f615e3faa60 R15: 000055572e92bd08 </TASK> Don't hold the device_list_mutex while calling into btrfs_get_dev_zone_info() in btrfs_get_dev_zone_info_all_devices() to mitigate the issue. This is safe, as no other thread can touch the device list at the moment of execution. Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
taraant
pushed a commit
that referenced
this pull request
Apr 14, 2026
commit 426295ef18c5d5f0b7f75ac89d09022fcfafd25c upstream.
Patch series "kallsyms: Prevent invalid access when showing module
buildid", v3.
We have seen nested crashes in __sprint_symbol(), see below. They seem to
be caused by an invalid pointer to "buildid". This patchset cleans up
kallsyms code related to module buildid and fixes this invalid access when
printing backtraces.
I made an audit of __sprint_symbol() and found several situations
when the buildid might be wrong:
+ bpf_address_lookup() does not set @modbuildid
+ ftrace_mod_address_lookup() does not set @modbuildid
+ __sprint_symbol() does not take rcu_read_lock and
the related struct module might get removed before
mod->build_id is printed.
This patchset solves these problems:
+ 1st, 2nd patches are preparatory
+ 3rd, 4th, 6th patches fix the above problems
+ 5th patch cleans up a suspicious initialization code.
This is the backtrace, we have seen. But it is not really important.
The problems fixed by the patchset are obvious:
crash64> bt [62/2029]
PID: 136151 TASK: ffff9f6c981d4000 CPU: 367 COMMAND: "btrfs"
#0 [ffffbdb687635c28] machine_kexec at ffffffffb4c845b3
#1 [ffffbdb687635c80] __crash_kexec at ffffffffb4d86a6a
#2 [ffffbdb687635d08] hex_string at ffffffffb51b3b61
#3 [ffffbdb687635d40] crash_kexec at ffffffffb4d87964
#4 [ffffbdb687635d50] oops_end at ffffffffb4c41fc8
#5 [ffffbdb687635d70] do_trap at ffffffffb4c3e49a
#6 [ffffbdb687635db8] do_error_trap at ffffffffb4c3e6a4
#7 [ffffbdb687635df8] exc_stack_segment at ffffffffb5666b33
#8 [ffffbdb687635e20] asm_exc_stack_segment at ffffffffb5800cf9
...
This patch (of 7)
The function kallsyms_lookup_buildid() initializes the given @namebuf by
clearing the first and the last byte. It is not clear why.
The 1st byte makes sense because some callers ignore the return code and
expect that the buffer contains a valid string, for example:
- function_stat_show()
- kallsyms_lookup()
- kallsyms_lookup_buildid()
The initialization of the last byte does not make much sense because it
can later be overwritten. Fortunately, it seems that all called functions
behave correctly:
- kallsyms_expand_symbol() explicitly adds the trailing '\0'
at the end of the function.
- All *__address_lookup() functions either use the safe strscpy()
or they do not touch the buffer at all.
Document the reason for clearing the first byte. And remove the useless
initialization of the last byte.
Link: https://lkml.kernel.org/r/20251128135920.217303-2-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.