wb7: defined proper modem's gpios and usb-soc addr - #78
Merged
Conversation
vdromanov
commented
Feb 1, 2022
| }; | ||
|
|
||
| gsm { | ||
| usb-soc-addr = "1c1c000"; // ehci2; modem is connected to |
Contributor
Author
There was a problem hiding this comment.
нужно каким-то образом из юзерспейса знать, на каком порту висит модем
пробовал тут phandle и alias - не получилось
…e/wb7-modem-support
Contributor
Author
|
идея Жени с device-tree - рабочая теперь вместо захардкоженной строчки адреса usb-шины в wb7, привязал модем к:
|
evgeny-boger
approved these changes
Feb 8, 2022
evgeny-boger
left a comment
Member
There was a problem hiding this comment.
пока не вливай, давай дождёмся всех PR
evgeny-boger
approved these changes
Feb 20, 2022
webconn
approved these changes
Feb 21, 2022
…e/wb7-modem-support
evgeny-boger
approved these changes
Feb 23, 2022
taraant
pushed a commit
that referenced
this pull request
May 16, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
May 16, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
May 16, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
May 19, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
May 19, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
May 19, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
May 19, 2025
Original commits:
arch/arm/Makefile
dd9d47a: ARM: 9156/1: drop cc-option fallbacks for architecture selection
arch/arm/boot/dts/Makefile
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
6e40c49: new dts for wb6.8.x (rtc_clkout is gpio)
757ff51: introduced a new model wb6.9: changed wdg-gpio; new eth phy (lan8720) (#69)
82d206f: wb: add dts and defconfig for SoM testing
41efdbd: ARM: dts: r40: Add dts for Wiren Board 7
a490e92: wb6.7.x: added -nousbhub dts (wbc-modem is connected directly to SoC's usb) (#85)
a047e1e: dts: wb7: add dts for WB 7.3
b4c9015: dts: add wirenboard6x-init DTS for 5.10 (#94)
dcb2d34: wb: dts: disable CAN on WB7.3 and add WB7.3.1
bd7d6f2: arm: dts: wb7: add 7.3.2 w/o eth MAC EEPROMs
e6227e4: wb7: add support for hw rev. 7.3.3 (#105)
3ea1b23: wb7: dts: lower usb-gadget speed; add initram-dts with high usb-gadget speed (#122)
efbe2be: add wb7min defconfig
06dad6d: ARM: dts: r40: Add dts for Wiren Board 7.4
37d87c1: add WBEC support for wb7 bootlet
0349992: dts: wb7: add WB 7.4.2 revision with different ADC resistor divider
6430e72: wb74: add 38071cb dts
arch/arm/boot/dts/imx23-audio.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx23-olinuxino.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx23.dtsi
52e1e85: mxs: imx23: use microseconds counter from DIGCTL block as a clocksource instead of 32kHz timer
arch/arm/boot/dts/imx28-ev-dbg.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx28-wirenboard50.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx28-wirenboard52-functest.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx28-wirenboard52.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx28-wirenboard55.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx28-wirenboard58.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx28-wirenboard5x-usbfw.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx28.dtsi
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx6ul-pinfunc.h
9c04994: ARM: dts: imx6ul: properly initialize UART7/8 RTS input regs
arch/arm/boot/dts/imx6ul-wirenboard-evk.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx6ul-wirenboard61.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
8b7ff1b: rts on rs485 uarts is configured as gpio with default PD (#56)
c336a5a: wb6: dts: define clock for phy for proper reset
6e40c49: new dts for wb6.8.x (rtc_clkout is gpio)
b042223: dts: disable rts-gpios on WB6 modX uarts by default (#68)
ad93eeb: wb7: defined proper modem's gpios and usb-soc addr (#78)
2a813ac: wb6, wb7: added rtc-rv8803 driver to defconfig (#84)
567646d: wb6: fix bootlet configuration and MMC pinctrl config (#89)
a5a031d: wb: dts: adjust gpio line names (#116)
arch/arm/boot/dts/imx6ul-wirenboard65.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
a5a031d: wb: dts: adjust gpio line names (#116)
arch/arm/boot/dts/imx6ul-wirenboard660.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
arch/arm/boot/dts/imx6ul-wirenboard670-nousbhub.dts
a490e92: wb6.7.x: added -nousbhub dts (wbc-modem is connected directly to SoC's usb) (#85)
arch/arm/boot/dts/imx6ul-wirenboard670.dts
b672c11: arch/arm/boot/dts: WB5, WB6: Add all .dts and corresponding Makefile
8b7ff1b: rts on rs485 uarts is configured as gpio with default PD (#56)
b042223: dts: disable rts-gpios on WB6 modX uarts by default (#68)
ad93eeb: wb7: defined proper modem's gpios and usb-soc addr (#78)
a5a031d: wb: dts: adjust gpio line names (#116)
arch/arm/boot/dts/imx6ul-wirenboard680.dts
6e40c49: new dts for wb6.8.x (rtc_clkout is gpio)
2a813ac: wb6, wb7: added rtc-rv8803 driver to defconfig (#84)
arch/arm/boot/dts/imx6ul-wirenboard690.dts
757ff51: introduced a new model wb6.9: changed wdg-gpio; new eth phy (lan8720) (#69)
d2deca0: dts: fixed unstable eth connection on wb6.9 (#75)
42e6bec: wb6.9: fixed incorrect clk on fec2 (#79)
a5a031d: wb: dts: adjust gpio line names (#116)
arch/arm/boot/dts/imx6ul-wirenboard6x-init.dts
b4c9015: dts: add wirenboard6x-init DTS for 5.10 (#94)
arch/arm/boot/dts/imx6ul.dtsi
955fa47: dts: imx6ul(l): add LDP_1P1 regulator
arch/arm/boot/dts/omap3.dtsi
6ce6443: ARM: dts: Fix swapped mmc order for omap3
arch/arm/boot/dts/omap4.dtsi
a55de4f: ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
arch/arm/boot/dts/omap44xx-clocks.dtsi
9f399a9: ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
arch/arm/boot/dts/omap5.dtsi
a55de4f: ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
arch/arm/boot/dts/sun8i-r40-wirenboard-som-test.dts
82d206f: wb: add dts and defconfig for SoM testing
a5a031d: wb: dts: adjust gpio line names (#116)
arch/arm/boot/dts/sun8i-r40-wirenboard720.dts
41efdbd: ARM: dts: r40: Add dts for Wiren Board 7
b905f07: ARM: dts: r40: wb7: enable battery driver
ad93eeb: wb7: defined proper modem's gpios and usb-soc addr (#78)
2a813ac: wb6, wb7: added rtc-rv8803 driver to defconfig (#84)
e0c49db: dts: rename wirenboard 7.2.0 dts file
a047e1e: dts: wb7: add dts for WB 7.3
bd7d6f2: arm: dts: wb7: add 7.3.2 w/o eth MAC EEPROMs
8dd7b01: dts: add missing wirenboard-7xx compatible strings for 7.2.x
arch/arm/boot/dts/sun8i-r40-wirenboard72x-eui-eeprom.dtsi
bd7d6f2: arm: dts: wb7: add 7.3.2 w/o eth MAC EEPROMs
arch/arm/boot/dts/sun8i-r40-wirenboard72x-factory.dts
37d87c1: add WBEC support for wb7 bootlet
arch/arm/boot/dts/sun8i-r40-wirenboard72x-initram.dts
3ea1b23: wb7: dts: lower usb-gadget speed; add initram-dts with high usb-gadget speed (#122)
8dd7b01: dts: add missing wirenboard-7xx compatible strings for 7.2.x
37d87c1: add WBEC support for wb7 bootlet
arch/arm/boot/dts/sun8i-r40-wirenboard72x-initram.dtsi
37d87c1: add WBEC support for wb7 bootlet
5c684d2: dts: fix microsd on 7.3+ boards in bootlet
arch/arm/boot/dts/sun8i-r40-wirenboard72x.dtsi
e0c49db: dts: rename wirenboard 7.2.0 dts file
a047e1e: dts: wb7: add dts for WB 7.3
bf5df80: wb:dts: fix annoying warning
0bc316f: arm: dts: wb7: change order of ethernet aliases
4cd32ad: dts: wb7: add generic labels for ethernet adapters (#107)
a5a031d: wb: dts: adjust gpio line names (#116)
3ea1b23: wb7: dts: lower usb-gadget speed; add initram-dts with high usb-gadget speed (#122)
b334992: wb7: dts: work around wrong LED mode on 2nd eth
0cbd16d: wb7: disable microsd card detect gpio
fe28816: add regulator-boot-on in dts
ca89d0b: wb7 dts: add wbio-i2c-recovery pins
arch/arm/boot/dts/sun8i-r40-wirenboard730.dts
a047e1e: dts: wb7: add dts for WB 7.3
e89aa80: wb:dts: move wb7.3.0 to include
dcb2d34: wb: dts: disable CAN on WB7.3 and add WB7.3.1
1e5bc22: fix userspace compatibility
bd7d6f2: arm: dts: wb7: add 7.3.2 w/o eth MAC EEPROMs
arch/arm/boot/dts/sun8i-r40-wirenboard731.dts
dcb2d34: wb: dts: disable CAN on WB7.3 and add WB7.3.1
1e5bc22: fix userspace compatibility
bd7d6f2: arm: dts: wb7: add 7.3.2 w/o eth MAC EEPROMs
arch/arm/boot/dts/sun8i-r40-wirenboard732.dts
bd7d6f2: arm: dts: wb7: add 7.3.2 w/o eth MAC EEPROMs
arch/arm/boot/dts/sun8i-r40-wirenboard733.dts
e6227e4: wb7: add support for hw rev. 7.3.3 (#105)
arch/arm/boot/dts/sun8i-r40-wirenboard734-38071cb.dts
efbe2be: add wb7min defconfig
arch/arm/boot/dts/sun8i-r40-wirenboard73x.dtsi
e89aa80: wb:dts: move wb7.3.0 to include
arch/arm/boot/dts/sun8i-r40-wirenboard741.dts
06dad6d: ARM: dts: r40: Add dts for Wiren Board 7.4
0349992: dts: wb7: add WB 7.4.2 revision with different ADC resistor divider
arch/arm/boot/dts/sun8i-r40-wirenboard742-38071cb.dts
6430e72: wb74: add 38071cb dts
e5de9a0: add necessary wbec modules to 38071cb defconfig; add modules to dts
arch/arm/boot/dts/sun8i-r40-wirenboard742.dts
0349992: dts: wb7: add WB 7.4.2 revision with different ADC resistor divider
arch/arm/boot/dts/sun8i-r40-wirenboard74x.dtsi
06dad6d: ARM: dts: r40: Add dts for Wiren Board 7.4
758f443: wirenboard74x.dtsi: fix `V_OUT ON` gpio name
0349992: dts: wb7: add WB 7.4.2 revision with different ADC resistor divider
091e719: wb74: disable microsd card detect gpio
5ce47c0: dts: wb74x: fix 1-Wire pins
fe28816: add regulator-boot-on in dts
ca89d0b: wb7 dts: add wbio-i2c-recovery pins
arch/arm/boot/dts/sun8i-r40-wirenboard7xx-38071cb.dtsi
efbe2be: add wb7min defconfig
arch/arm/boot/dts/sun8i-r40.dtsi
686a254: ARM: dts: sun8i: r40: add node for CAN controller
f815c6d: ARM: dts: sun8i: r40: Add timer node
a86742b: ARM: dtsi: add pwm node for sun8i R40.
f500a4a: ARM: dts: sun8i: r40: add second ethernet support (submitted to upstream)
8278a35: ARM: dts: sun8i: r40: add rtp node (submitted to upstream)
796285b: ARM: dts: sun8i: r40: add child iio node for gpadc
359abbb: ARM: dts: sun8i: r40: add usb0 dual role support
3a20b97: WIP: r40 sid
154bb8b: ARM: dts: sun8i: r40: add cpufreq tables
2de4fb0: dts: arm: r40: add various pins to pinctrl
2b4ba7f: ARM: dts: sun4i: r40: change uart compatible
6cdef71: dts: arm: r40: add various pins to pinctrl
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
286c39d: arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
edc5d16: arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
286c39d: arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
a4a7cf6: arm64: dts: allwinner: a64: Sort watchdog node
e0475ad: arm64: dts: allwinner: Add sun4i MMIO timer nodes
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
8d7906c: arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
e0475ad: arm64: dts: allwinner: Add sun4i MMIO timer nodes
drivers/of/overlay.c
ad88b84: of: overlay: kobjectify overlay objects
860cbed: of: overlay: global sysfs enable attribute
b446483: of: overlay: add per overlay sysfs attributes
68bb5b9: wb: workaround: disable memory leak warning in runtime dt overlays
taraant
pushed a commit
that referenced
this pull request
Jun 9, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Jun 9, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Jun 9, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Jul 29, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Jul 29, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Jul 29, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Oct 31, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Oct 31, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Oct 31, 2025
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Apr 14, 2026
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Apr 14, 2026
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
taraant
pushed a commit
that referenced
this pull request
Apr 14, 2026
* wb7: defined proper modem's gpios and usb-soc addr * binded wbc-modem usb ports in wb6 and 7 * moved modem's gpios info to actual usb node * added default state to modem's usb node * modem_usb: port2 in wb6.x; port3 in wb6.7+
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Поддержка модемов в wb7. Правильно разворачиваются gpio, появился адрес нужного usb
Связанные PR: wb-utils, hwconf